ola, aqui fica
eu ja esto a recebere 5****
se alguem precisa aqui fica.
Here's a little manual on how to do it:
MPCS(latest version,but any should work)
newcs.xml(tested with 1.31,but 1.20 and 1.50 should work)
How to configure Mpcs:
mpcs.conf edit only this line:
Port = 15000 ----> or whatever port you wish to use.
Everything else on this file should be not active, or blocked with a #.
Edit and create user and pass as follows:
User = user -------> your choice,edit as required
Pwd = pass -------> your choice,edit as required
Uniq = 0 -------> If 0 it can be shared with other emus,if 1,only one login allowed.
Group = 1 ------->Only group 1 allowed acess to this password,group 2 will be blocked.
*please note if you have both D+ and Cabo as locals,you need to change Group options so emm's are send to the right card.
mpcs.server-------> Please edit as required
Label = newcamd
Protocol = newcamd
Key = 0102030405060708091011121314
Device = localhost,10310 -------->Edit with dreambox ip and newcs port.
Account = user,pass
Fallback = 0
DisableServerFilter = 1 -----------> Very Important,without this,it wont work.
Group = 1 ---------- > Same as previous,when 2 Nagra3 cards in use.
This is MPCS configured,please be aware that above settings on mpcs.server has to match port,localhost,user and pass of newcs.xml to work.
With all this done,now let's look at CCcam configuration:
Edit CCcam.cfg and Add the following:
L: localhost 15000 user pass 1802 000000 -----> For Cabo Cards
L: localhost 15000 user pass 1810 000000 -----> For D+ Cards
Again,please note that you will need to edit above ports,users and password with your own.
Please note that this is only for people with local Cabo or D+ cards,if you dont have one as local,then you dont need to do this.
All you need is a peer with one of these local cards and should have a picture.
Everything should be ok now,and with these basic settings we should have Cabo and D+ nagra back on the share without freezes.
Heres an example of a script that you can use:
/usr/bin/ CCcam_2.0.4 &