Página 1 de 8 12345 ... ÚltimoÚltimo
Resultados 1 a 15 de 112

Barry Allen for Dreambox 7025, 7020 and 600 (and a little bit of 800)Version 4.4.4

  1. #1
    Gforum Iniciado
    Registo: Feb 2008
    Idade: 44
    Posts: 6

    Padrão Barry Allen for Dreambox 7025, 7020 and 600 (and a little bit of 800)Version 4.4.4

    Barry Allen for Dreambox 7025, 7020 and 600 (and a little bit of 800)Version 4.4.4
    ================================================== ==
    Version 4.4.4 by gutemine from 29.02.2008
    ================================================== ==
    Release infos
    ================================================== ==
    0.1.0 first official Version
    0.1.1 add LCD support, copy, rename and erase
    0.2.0 add backup and more tools options
    0.2.1 bugfixes
    0.2.2 quod erat demonstrandum
    0.3.0 WebIF and Wizards
    0.3.1 nl, 12 images, bugfixes
    0.3.2 tar.bz2 images, instant extract
    0.4.0 OE 1.5 support, Flashing and user scripts WebIF
    0.4.1 keep squashfs and Barry Allen gets fat
    0.4.2 time for a new version and new language fr
    0.4.3 feeding the GNU
    0.4.4 time for a new version
    4.4.4 preliminary dm800 support
    ================================================== ==
    Thanks to noggie for his nfi file tools !
    Thanks to DarkVolli for the enigma1 plugin !
    ================================================== ==

    1) Prerequisites

    During the installation there has to be CF
    card in the Dreambox (attention: insert or remove
    into Dreambox 7025 cardreader only when Dreambox
    is turned off), or an USB stick which is successfully
    detected (in case of problems try an USB Hub).

    If Barry Allen on USB is used then put
    the CVS Image from OoZooN in Flash, because this image
    has the USB drivers permanently built into the kernel.

    If neither CF card not USB Stick are attached then
    installation takes place on the Harddisk. Because
    the images then also run from there it will run
    permanently and it could be necessary that you disable
    Harddisk Standby in the images to allow running Barry
    Allen stable from Harddisk.


    2) Installation

    First boot from Flash and then copy the file
    enigma2-plugin-extensions-barryallen*.ipk
    to /tmp with ftp (TCP/IP must be working already).

    If you have an image in Flash that offers a Blue
    Pannel Manual Addon Install, then you can use this
    functionality to install the ipk file.

    If not, then install Barry Allen by entering the
    following commands in a Telnet session:

    cd /
    ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk

    Then restart enigma2 and the Barry Allen Plugin
    shoudl show up under Games / Plugins.

    In the Images installed by Barry Allen you don't have
    to install the Barry Allen Plugin anymore.
    The Barry Allen Plugin integrates himself into then
    automatically during the image extract.

    And you can remove Barry Allen if you are booted
    from Flash:

    ipkg remove enigma2-plugin-extensions-barryallen

    3) Usage

    There is now the enigma2 Plugin of Barry Allen included
    under Games / Plugins of the enigma2 menu,
    which offers the full functionality of Barry Allen.

    For extracting of nfi images in Barry Allen copy the
    image files to /MB_Images (normally a link to
    /media/hdd/MB_Images created during Barry Allen
    installation)

    If there are Problems with image extraction or other tasks
    with the enigma2 plugin try doing it in telnet:

    cd /media/ba
    ba.sh extract nameoftheimage

    On the next reboot this new Image should be available
    in the bootmanager for choosing to boot it and then it
    can be customized and used as usual.

    The Bootmanager now should remember the last booted
    image and hence recordings from Deepstandby should work
    now.

    ================================================== ==
    Have Fun using Barry Allen on the Dreambox !!!!
    ================================================== ==
    link download

    [IMG:153:39]http://img502.imageshack.us/img502/4267/downloadtd6.gif[/img]

    Última edição por parasiempre; 29-02-2008 às 23:58.

  2. #2
    Gforum Veterano
    Registo: Mar 2007
    Posts: 2.744

    Padrão Barry Allen 4.5.4

    ================================================== ==
    Barry Allen for Dreambox 7025, 7020, 600 and 800
    ================================================== ==
    Version 4.5.4 by gutemine from 19.05.2008
    ================================================== ==
    Release infos
    ================================================== ==
    0.1.0 first official Version
    0.1.1 add LCD support, copy, rename and erase
    0.2.0 add backup and more tools options
    0.2.1 bugfixes
    0.2.2 quod erat demonstrandum
    0.3.0 WebIF and Wizards
    0.3.1 nl, 12 images, bugfixes
    0.3.2 tar.bz2 images, instant extract
    0.4.0 OE 1.5 support, Flashing and user scripts WebIF
    0.4.1 keep squashfs and Barry Allen gets fat
    0.4.2 time for a new version and new language fr
    0.4.3 feeding the GNU
    0.4.4 time for a new version
    4.4.6 preliminary dm800 support
    4.5.1 DM 800 support
    ================================================== ==
    Thanks to noggie for his nfi file tools !
    Thanks to DarkVolli for the enigma1 plugin !
    ================================================== ==

    1) Prerequisites

    During the installation there has to be CF
    xxxx in the Dreambox (attention: insert or remove
    into Dreambox 7025 xxxxreader only when Dreambox
    is turned off), or an USB stick which is successfully
    detected (in case of problems try an USB Hub).

    If Barry Allen on USB is used then put
    the CVS Image from OoZooN in Flash, because this image
    has the USB drivers permanently built into the kernel.

    If neither CF xxxx not USB Stick are attached then
    installation takes place on the Harddisk. Because
    the images then also run from there it will run
    permanently and it could be necessary that you disable
    Harddisk Standby in the images to allow running Barry
    Allen stable from Harddisk.


    2) Installation

    First boot from Flash and then copy the file
    enigma2-plugin-extensions-barryallen*.ipk
    to /tmp with ftp (TCP/IP must be working already).

    If you have an image in Flash that offers a Blue
    Pannel Manual Addon Install, then you can use this
    functionality to install the ipk file.

    If not, then install Barry Allen by entering the
    following commaxxx in a Telnet session:

    cd /
    ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk

    Then restart enigma2 and the Barry Allen Plugin
    shoudl show up under Games / Plugins.

    In the Images installed by Barry Allen you don't have
    to install the Barry Allen Plugin anymore.
    The Barry Allen Plugin integrates himself into then
    automatically during the image extract.

    And you can remove Barry Allen if you are booted
    from Flash:

    ipkg remove enigma2-plugin-extensions-barryallen

    3) Usage

    There is now the enigma2 Plugin of Barry Allen included
    under Games / Plugins of the enigma2 menu,
    which offers the full functionality of Barry Allen.

    For extracting of nfi images in Barry Allen copy the
    image files to /MB_Images (normally a link to
    /media/hdd/MB_Images created during Barry Allen
    installation)

    If there are Problems with image extraction or other tasks
    with the enigma2 plugin try doing it in telnet:

    cd /media/ba
    ba.sh extract nameoftheimage

    On the next reboot this new Image should be available
    in the bootmanager for choosing to boot it and then it
    can be customized and used as usual.

    The Bootmanager now should remember the last booted
    image and hence recordings from Deepstandby should work
    now.

    ================================================== ==
    Have Fun using Barry Allen on the Dreambox !!!!
    ================================================== ==

    Cumps: fergomes

    Arquivos Anexos Arquivos Anexos

  3. #3
    Gforum Veterano
    Registo: Mar 2007
    Posts: 2.744

    Padrão Barry Allen 4.5.9

    Barry Allen 4.5.9


    Barry Allen for Dreambox 7025, 7020, 600, 800 and a little bit of 8000
    Version 4.5.9 by gutemine from 27.07.2008

    Release infos

    0.1.0 first official Version
    0.1.1 add LCD support, copy, rename and erase
    0.2.0 add backup and more tools options
    0.2.1 bugfixes
    0.2.2 quod erat demonstrandum
    0.3.0 WebIF and Wizards
    0.3.1 nl, 12 images, bugfixes
    0.3.2 tar.bz2 images, instant extract
    0.4.0 OE 1.5 support, Flashing and user scripts WebIF
    0.4.1 keep squashfs and Barry Allen gets fat
    0.4.2 time for a new version and new language fr
    0.4.3 feeding the GNU
    0.4.4 time for a new version
    4.4.6 preliminary dm800 support
    4.5.0 DM 800 support
    4.5.9 preliminary 8000 support
    ================================================== ==
    Thanks to noggie for his nfi file tools !
    Thanks to DarkVolli for the enigma1 plugin !
    ================================================== ==

    1) Prerequisites

    During the installation there has to be CF
    card in the Dreambox (attention: insert or remove
    into Dreambox 7025 cardreader only when Dreambox
    is turned off), or an USB stick which is successfully
    detected (in case of problems try an USB Hub).

    If Barry Allen on USB is used then put
    the CVS Image from OoZooN in Flash, because this image
    has the USB drivers permanently built into the kernel.

    If neither CF card not USB Stick are attached then
    installation takes place on the Harddisk. Because
    the images then also run from there it will run
    permanently and it could be necessary that you disable
    Harddisk Standby in the images to allow running Barry
    Allen stable from Harddisk.


    2) Installation

    First boot from Flash and then copy the file
    enigma2-plugin-extensions-barryallen*.ipk
    to /tmp with ftp (TCP/IP must be working already).

    If you have an image in Flash that offers a Blue
    Pannel Manual Addon Install, then you can use this
    functionality to install the ipk file.

    If not, then install Barry Allen by entering the
    following commands in a Telnet session:

    cd /
    ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk

    Then restart enigma2 and the Barry Allen Plugin
    shoudl show up under Games / Plugins.

    In the Images installed by Barry Allen you don't have
    to install the Barry Allen Plugin anymore.
    The Barry Allen Plugin integrates himself into then
    automatically during the image extract.

    And you can remove Barry Allen if you are booted
    from Flash:

    ipkg remove enigma2-plugin-extensions-barryallen

    3) Usage

    There is now the enigma2 Plugin of Barry Allen included
    under Games / Plugins of the enigma2 menu,
    which offers the full functionality of Barry Allen.

    For extracting of nfi images in Barry Allen copy the
    image files to /MB_Images (normally a link to
    /media/hdd/MB_Images created during Barry Allen
    installation)

    If there are Problems with image extraction or other tasks
    with the enigma2 plugin try doing it in telnet:

    cd /media/ba
    ba.sh extract nameoftheimage

    On the next reboot this new Image should be available
    in the bootmanager for choosing to boot it and then it
    can be customized and used as usual.

    The Bootmanager now should remember the last booted
    image and hence recordings from Deepstandby should work
    now.

    ================================================== ==
    Have Fun using Barry Allen on the Dreambox !!!!


    Arquivos Anexos Arquivos Anexos

  4. #4
    Gforum Iniciado Avatar de kakun
    Registo: Apr 2008
    Idade: 33
    Posts: 38

    Padrão barryallen_4.6.0

    Barry Allen Version 4.6.0 by gutemine



    Barry Allen for Dreambox 7025, 7020, 600, 800, 8000
    Release infos
    ================================================== ==
    0.1.0 first official Version
    0.1.1 add LCD support, copy, rename and erase
    0.2.0 add backup and more tools options
    0.2.1 bugfixes
    0.2.2 quod erat demonstrandum
    0.3.0 WebIF and Wizards
    0.3.1 nl, 12 images, bugfixes
    0.3.2 tar.bz2 images, instant extract
    0.4.0 OE 1.5 support, Flashing and user scripts WebIF
    0.4.1 keep squashfs and Barry Allen gets fat
    0.4.2 time for a new version and new language fr
    0.4.3 feeding the GNU
    0.4.4 time for a new version
    4.4.6 preliminary dm800 support
    4.5.0 DM 800 support
    4.6.0 DM 8000 support
    ================================================== ==
    Thanks to noggie for his nfi file tools !
    Thanks to DarkVolli for the enigma1 plugin !
    ================================================== ==

    1) Prerequisites

    During the installation there has to be CF
    card in the Dreambox (attention: insert or remove
    into Dreambox 7025 cardreader only when Dreambox
    is turned off), or an USB stick which is successfully
    detected (in case of problems try an USB Hub).

    If Barry Allen on USB is used then put
    the CVS Image from OoZooN in Flash, because this image
    has the USB drivers permanently built into the kernel.

    If neither CF card not USB Stick are attached then
    installation takes place on the Harddisk. Because
    the images then also run from there it will run
    permanently and it could be necessary that you disable
    Harddisk Standby in the images to allow running Barry
    Allen stable from Harddisk.


    2) Installation

    First boot from Flash and then copy the file
    enigma2-plugin-extensions-barryallen*.ipk
    to /tmp with ftp (TCP/IP must be working already).

    If you have an image in Flash that offers a Blue
    Pannel Manual Addon Install, then you can use this
    functionality to install the ipk file.

    If not, then install Barry Allen by entering the
    following commands in a Telnet session:

    cd /
    ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk

    Then restart enigma2 and the Barry Allen Plugin
    shoudl show up under Games / Plugins.

    In the Images installed by Barry Allen you don't have
    to install the Barry Allen Plugin anymore.
    The Barry Allen Plugin integrates himself into then
    automatically during the image extract.

    And you can remove Barry Allen if you are booted
    from Flash:

    ipkg remove enigma2-plugin-extensions-barryallen

    3) Usage

    There is now the enigma2 Plugin of Barry Allen included
    under Games / Plugins of the enigma2 menu,
    which offers the full functionality of Barry Allen.

    For extracting of nfi images in Barry Allen copy the
    image files to /MB_Images (normally a link to
    /media/hdd/MB_Images created during Barry Allen
    installation)

    If there are Problems with image extraction or other tasks
    with the enigma2 plugin try doing it in telnet:

    cd /media/ba
    ba.sh extract nameoftheimage

    On the next reboot this new Image should be available
    in the bootmanager for choosing to boot it and then it
    can be customized and used as usual.

    The Bootmanager now should remember the last booted
    image and hence recordings from Deepstandby should work
    now.

    ================================================== ==
    Have Fun using Barry Allen on the Dreambox !!!!
    ================================================== =

  5. #5
    Gforum Veterano
    Registo: Mar 2007
    Posts: 2.744

    Padrão Barry Allen, the second Flash ! 4.6.1

    Barry Allen, the second Flash ! 4.6.1

    Barry Allen for Dreambox 7025, 7020, 600, 800, 8000
    ================================================== ==
    Version 4.6.1 by gutemine from 08.08.2008
    (nicht wundern, ist ja noch nicht fertig weil noch Übersetzungen fehlen und Ihr ja auch noch erst testen müsst)
    ================================================== ==
    Release infos

    4.6.1 DM 8000 support

    Arquivos Anexos Arquivos Anexos

  6. #6
    Gforum Veterano
    Registo: Mar 2007
    Posts: 2.744

    Padrão Version 4.6.2 by gutemine from 08.08.2008

    Barry Allen for Dreambox 7025, 7020, 600, 800, 8000
    ================================================== ==
    Version 4.6.0 by gutemine from 08.08.2008
    ================================================== ==
    Release infos
    ================================================== ==
    0.1.0 first official Version
    0.1.1 add LCD support, copy, rename and erase
    0.2.0 add backup and more tools options
    0.2.1 bugfixes
    0.2.2 quod erat demonstrandum
    0.3.0 WebIF and Wizards
    0.3.1 nl, 12 images, bugfixes
    0.3.2 tar.bz2 images, instant extract
    0.4.0 OE 1.5 support, Flashing and user scripts WebIF
    0.4.1 keep squashfs and Barry Allen gets fat
    0.4.2 time for a new version and new language fr
    0.4.3 feeding the GNU
    0.4.4 time for a new version
    4.4.6 preliminary dm800 support
    4.5.0 DM 800 support
    4.6.1 DM 8000 support
    ================================================== ==
    Thanks to noggie for his nfi file tools !
    Thanks to DarkVolli for the enigma1 plugin !
    ================================================== ==

    1) Prerequisites

    During the installation there has to be CF
    card in the Dreambox (attention: insert or remove
    into Dreambox 7025 cardreader only when Dreambox
    is turned off), or an USB stick which is successfully
    detected (in case of problems try an USB Hub).

    If Barry Allen on USB is used then put
    the CVS Image from OoZooN in Flash, because this image
    has the USB drivers permanently built into the kernel.

    If neither CF card not USB Stick are attached then
    installation takes place on the Harddisk. Because
    the images then also run from there it will run
    permanently and it could be necessary that you disable
    Harddisk Standby in the images to allow running Barry
    Allen stable from Harddisk.


    2) Installation

    First boot from Flash and then copy the file
    enigma2-plugin-extensions-barryallen*.ipk
    to /tmp with ftp (TCP/IP must be working already).

    If you have an image in Flash that offers a Blue
    Pannel Manual Addon Install, then you can use this
    functionality to install the ipk file.

    If not, then install Barry Allen by entering the
    following commands in a Telnet session:

    cd /
    ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk

    Then restart enigma2 and the Barry Allen Plugin
    shoudl show up under Games / Plugins.

    In the Images installed by Barry Allen you don't have
    to install the Barry Allen Plugin anymore.
    The Barry Allen Plugin integrates himself into then
    automatically during the image extract.

    And you can remove Barry Allen if you are booted
    from Flash:

    ipkg remove enigma2-plugin-extensions-barryallen

    3) Usage

    There is now the enigma2 Plugin of Barry Allen included
    under Games / Plugins of the enigma2 menu,
    which offers the full functionality of Barry Allen.

    For extracting of nfi images in Barry Allen copy the
    image files to /MB_Images (normally a link to
    /media/hdd/MB_Images created during Barry Allen
    installation)

    If there are Problems with image extraction or other tasks
    with the enigma2 plugin try doing it in telnet:

    cd /media/ba
    ba.sh extract nameoftheimage

    On the next reboot this new Image should be available
    in the bootmanager for choosing to boot it and then it
    can be customized and used as usual.

    The Bootmanager now should remember the last booted
    image and hence recordings from Deepstandby should work
    now.

    ================================================== ==
    Have Fun using Barry Allen on the Dreambox !!!!
    ================================================== ==
    Arquivos Anexos Arquivos Anexos

  7. #7
    Gforum Veterano
    Registo: Mar 2007
    Posts: 2.744

    Padrão enigma2 plugin barryallen 4.6.3 mipsel.

    enigma2-plugin-barryallen_4.6.3_mipsel


    Barry Allen for Dreambox 7025, 7020, 600, 800, 8000
    ================================= ================= ==
    Version 4.6.3 by gutemine from 08.08.2008
    ================================= ================= ==
    Release infos
    ================================= ================= ==
    0.1.0 first official Version
    0.1.1 add LCD support, copy, rename and erase
    0.2.0 add backup and more tools options
    0.2.1 bugfixes
    0.2.2 quod erat demonstrandum
    0.3.0 WebIF and ******s
    0.3.1 nl, 12 images, bugfixes
    0.3.2 tar.bz2 images, instant extract
    0.4.0 OE 1.5 support, Flashing and user scripts WebIF
    0.4.1 keep squashfs and Barry Allen gets fat
    0.4.2 time for a new version and new language fr
    0.4.3 feeding the GNU
    0.4.4 time for a new version
    4.4.6 preliminary dm800 support
    4.5.0 DM 800 support
    4.6.1 DM 8000 support
    ================================= ================= ==
    Thanks to noggie for his nfi file tools !
    Thanks to DarkVolli for the enigma1 plugin !
    ================================= ================= ==

    1) Prerequisites

    During the installation there has to be CF
    card in the Dreambox (attention: insert or remove
    into Dreambox 7025 cardreader only when Dreambox
    is turned off), or an USB stick which is successfully
    detected (in case of problems try an USB Hub).

    If Barry Allen on USB is used then put
    the CVS Image from OoZooN in Flash, because this image
    has the USB drivers permanently built into the kernel.

    If neither CF card not USB Stick are attached then
    installation takes place on the Harddisk. Because
    the images then also run from there it will run
    permanently and it could be necessary that you disable
    Harddisk Standby in the images to allow running Barry
    Allen stable from Harddisk.


    2) Installation

    First boot from Flash and then copy the file
    enigma2-plugin-extensions-barryallen*.ipk
    to /tmp with ftp (TCP/IP must be working already).

    If you have an image in Flash that offers a Blue
    Pannel Manual Addon Install, then you can use this
    functionality to install the ipk file.

    If not, then install Barry Allen by entering the
    following commands in a Telnet session:

    cd /
    ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk

    Then restart enigma2 and the Barry Allen Plugin
    shoudl show up under Games / Plugins.

    In the Images installed by Barry Allen you don't have
    to install the Barry Allen Plugin anymore.
    The Barry Allen Plugin integrates himself into then
    automatically during the image extract.

    And you can remove Barry Allen if you are booted
    from Flash:

    ipkg remove enigma2-plugin-extensions-barryallen

    3) Usage

    There is now the enigma2 Plugin of Barry Allen included
    under Games / Plugins of the enigma2 menu,
    which offers the full functionality of Barry Allen.

    For extracting of nfi images in Barry Allen copy the
    image files to /MB_Images (normally a link to
    /media/hdd/MB_Images created during Barry Allen
    installation)

    If there are Problems with image extraction or other tasks
    with the enigma2 plugin try doing it in telnet:

    cd /media/ba
    ba.sh extract nameoftheimage

    On the next reboot this new Image should be available
    in the bootmanager for choosing to boot it and then it
    can be customized and used as usual.

    The Bootmanager now should remember the last booted
    image and hence recordings from Deepstandby should work
    now.

    ================================= ================= ==
    Have Fun using Barry Allen on the Dreambox !!!!
    ================================= ================= ==
    Arquivos Anexos Arquivos Anexos

  8. #8
    Gforum Veterano
    Registo: Mar 2007
    Posts: 2.744

    Padrão Barry Allen 4.6.4

    Barry Allen 4.6.4


    Barry Allen for Dreambox 7025, 800, 8000
    ================================================== ==
    Version 4.6.0 by gutemine from 08.08.2008
    ================================================== ==
    Release infos
    ================================================== ==
    0.1.0 first official Version
    0.1.1 add LCD support, copy, rename and erase
    0.2.0 add backup and more tools options
    0.2.1 bugfixes
    0.2.2 quod erat demonstrandum
    0.3.0 WebIF and Wizards
    0.3.1 nl, 12 images, bugfixes
    0.3.2 tar.bz2 images, instant extract
    0.4.0 OE 1.5 support, Flashing and user scripts WebIF
    0.4.1 keep squashfs and Barry Allen gets fat
    0.4.2 time for a new version and new language fr
    0.4.3 feeding the GNU
    0.4.4 time for a new version
    4.4.6 preliminary dm800 support
    4.5.0 DM 800 support
    4.6.1 DM 8000 support
    ================================================== ==
    Thanks to noggie for his nfi file tools !
    Thanks to DarkVolli for the enigma1 plugin !
    ================================================== ==
    Arquivos Anexos Arquivos Anexos

  9. #9
    Gforum Veterano
    Registo: Mar 2007
    Posts: 2.744

    Padrão barryallen_4.6 .5

    Barry Allen für die 8000 und 800er - der



    Hi !

    Nachdem bald Leute/Betatester in Ihrem hemmungslosem Optimismus versuchen werden Barry Allen auf Ihrer 8000 zu installieren hier halt mal ein entsprechender Thread dafür (wo Ihr natürlich AUCH Probleme mit eurer 800er einwerfen könnt, durch den neuen secondstage loader hat sich da ja auch einiges geändert)

    Bitte daher nur mehr den 4.5.6 kit aus dem Anhang verwenden !!!

    Dieser kit ist aber nur für die Leute die Hier im Board auch testen, nicht einfach woanders auch hochladen sonst kommen wir durcheinander, weil ich den kit wahrscheinlich noch mehrmals austauschen muss bis alles läuft !

    Also sobald jemand es auf seiner 8*er ausprobieren will, einfach installieren und nfi image auspacken probieren, backupen, booten, mal sehen was davon funktioniert. Bitte aber immer ein image mit dem letzten secondstage loader im Flash haben (8000er ist schon bei #65 und 800er bei #62) und natürlich auch mit den USB treibern fix im kernel, da ja auch der CF Reader bei der 8000er am USB hängt.

    Wobei da sicher immer noch Kleinigkeiten nicht passen werden, da das ganze ja erstmals ohne entsprechende Hardware eingebaut wurde.

    Also testet mal schön und reportet Eure Ergebnisse !

    Als erstes würde mich mal das log von einem ipkg install /tmp/*barryallen*.ipk in telnet interessieren mit der Info ob USB stick oder CF karte dran waren (bitte nicht beides, das testen wir erst später).

    Und natürlich der output von find /dev/scsi wenn die entsprechenden devices angesteckt sind.

    Und dann ein ba.sh extract imagename

    Und dann sehen wir weiter :-)

    Und natürlich erstmals Viel Spass allen die dabei Mittesten und Mitentwickeln wollen !

    PS: Ziel wäre es natürlich so schnell wie möglich einen BA version 4.7 zu haben wo dann alles wieder wie von den anderen boxen gewohnt läuft, wobei das eigentlich wie üblich von Eurer Mitarbeit abhängt.

    LG
    gutemine

    Download Aqui

  10. #10
    Gforum Veterano
    Registo: Mar 2007
    Posts: 2.744

    Padrão Barryallen 4.6.22

    Barryallen 4.6.22


    IF YOU HAVE PROBLEMS WITH THE BOOTMANAGER THAT IT DOESN'T REACT TO THE REMOTE CONTROL,
    THEN PLEASE TRY OUT FIRST THE RC DEVICE SETTINGS IN THE BARRY ALLEN SETUP WIZZARD !!


    _http://www.sendspace.com/file/yi5f9o

  11. #11
    Gforum Veterano
    Registo: Mar 2007
    Posts: 2.744

    Padrão Barryallen 4.6.24

    Barryallen 4.6.24

    IF YOU HAVE PROBLEMS WITH THE BOOTMANAGER THAT IT DOESN'T REACT TO THE REMOTE CONTROL,
    THEN PLEASE TRY OUT FIRST THE RC DEVICE SETTINGS IN THE BARRY ALLEN SETUP WIZZARD !!!
    Arquivos Anexos Arquivos Anexos

  12. #12
    Gforum Veterano
    Registo: Mar 2007
    Posts: 2.744

    Padrão Barryallen 4.6.25

    Mais uma actualização do Barry Allen 4.6.25

    Arquivos Anexos Arquivos Anexos

  13. #13
    Gforum Veterano
    Registo: Mar 2007
    Posts: 2.744

    Padrão Barry Allen Version 4.6.32

    Barry Allen Version 4.6.32

    Barry Allen for Dreambox 7025, 800, 8000

    Arquivos Anexos Arquivos Anexos

  14. #14
    Gforum Veterano
    Registo: Mar 2007
    Posts: 2.744

    Padrão Barry Allen for Dreambox Version 4.6.38

    Barry Allen for Dreambox Version 4.6.38


    DANKE auch an alle die am 8* Support mitgearbeitet haben !
    ================================================== ==
    Barry Allen for Dreambox 7025, 800, 8000
    ================================================== ==
    Version 4.6.38 by gutemine from 06.12.2008
    ================================================== ==
    Release infos
    ================================================== ==
    0.1.0 first official Version
    0.1.1 add LCD support, copy, rename and erase
    0.2.0 add backup and more tools options
    0.2.1 bugfixes
    0.2.2 quod erat demonstrandum
    0.3.0 WebIF and Wizards
    0.3.1 nl, 12 images, bugfixes
    0.3.2 tar.bz2 images, instant extract
    0.4.0 OE 1.5 support, Flashing and user scripts WebIF
    0.4.1 keep squashfs and Barry Allen gets fat
    0.4.2 time for a new version and new language fr
    0.4.3 feeding the GNU
    0.4.4 time for a new version
    4.4.6 preliminary dm800 support
    4.5.0 DM 800 support
    4.6.1 DM 8000 support
    ================================================== ==
    Danke an noggie fuer seine nfi File Werkzeuge !
    Danke an DarkVolli fuer sein enigma1 Plugin!
    ================================================== ==

    1) Voraussetzung

    Es muss waehrend der Installation eine CF Karte in der
    Dreambox sein (Achtung CF Karte nur im ausgeschalteten
    Zustand in den Leser der Dreambox 7025 rein oder raustun),
    ODER ein USB Stick der erfolgreich erkannt wird
    (bei Problemen damit einen USB Hub probieren).

    Im Falle von Barry Allen auf USB stick muss das
    CVS Image von OoZooN im Flash, weil
    dort die entsprechenden USB Treiber fix verbaut sind
    (Danke OoZooN !) und nicht nachgeladen werden muessen.

    Wenn weder CF Karte noch USB Stick angesteckt sind
    wird auf die Harddisk installiert, da dann aber auch die
    Images von dort gebootet werden wird diese
    staendig laufen, bzw. es kann sein das man das Harddisk
    Standby in den Images disablen muss damit Barry Allen
    von Harddisk stabil laeuft.


    2) Installation

    Zuerst vom Flash booten und dann kopiert das file
    enigma2-plugin-extensions-barryallen*.ipk File
    auf /tmp mit ftp (TCP/IP muss dafür natuerlich
    schon funktionieren).

    Wenn Ihr ein Image im Flash habt, das ein Blue
    Pannel hat koennt Ihr damit mit Manual Install das
    ipk file installieren.

    Wenn nicht, dann installiert Barry Allen
    mit folgenden Kommandos im Telnet:

    code:

    cd /
    ipkg install /tmp/enigma2-plugin-extensions-barryallen*.ipk



    Dann enigma2 restarten und das Barry Allen Plugin sollte
    unter Spiele / Erweiterungen auftauchen.

    In den vom Barry Allen installieren Images
    muss man Barry Allen nicht mehr installieren.
    Das Barry Allen Plugin integriert sich dort
    automatisch während dem extrahieren.

    Und man kann Barry Allen natürlich jederzeit
    wieder deinstallieren wenn man vom Flash
    gebootet ist:

    code:

    ipkg remove enigma2-plugin-extensions-barryallen



    3) Verwendung

    Unter Spiele/Erweiterungen vom enigma2 Menu
    befindet sich nach der Installation das Barry Allen
    Plugin mit den man die vollen Funktionen von Barry Allen
    ausführen kann.

    Um weitere nfi Images mit dem Barry Allen Plugin
    zu extrahieren kopiere diese vorher auf /MB_Images
    Dies ist normalerweise ein Link auf /media/hdd/MB_Images
    der waehrend der installation von Barry Allen
    angelegt wird.

    Falls es Probleme beim extrahieren von Images oder anderen
    Funktionen gibt diese im Telnet probieren:

    code:

    cd /media/ba
    ba.sh extract namedesimages


    Beim naechsten Reboot sollten die extrahierten Image dann
    vom Bootmanager zur Auswahl angeboten werden, und koennen
    dann zum booten ausgewaehlt und dann ganz normal
    eingerichter und verwendet werden.

    Der Bootmanager merkt sich auch jetzt das zuletzt
    gebootete Image, damit sollten auch Aufnahmen
    aus dem Deepstandby funktionieren.

    ================================================== ==
    Viel Spass beim Verwenden von Barry Allen
    auf der Dreambox !!!
    ================================================== ==


    Zitat:
    Ich habe Euch eine 4.6.34 gepostet wo die USB Treiber wieder auf allen boxen geladen werden und auch das *-bootlogo ipk /boot mount gefixed ist (weil das geht mir auf den wecker).

    Und Ihr beklagt euch mit Euren alten Images/Treibern im Flash NICHT wenn neue Images auf CF/USB komische Sachen machen wie das das autoresolution nicht geht, 16:9 Umschaltung nicht funktioniert, etc...

    Fragen in diese Richtung werden nicht beantwortet, ausser Ihr habt ein aktuellles Image mit den aktuellen Treibern im Flash.

    Mal sehen ob es Euch so lieber ist :-)

    PS: Ich liebe Erziehungsarbeit !

    LG
    gutemine


    Zitat:
    nachdem Ihr es immer wieder schafft das Image im Flash doch nicht so aktuell zu halten wie Ihr solltet habe ich jetzt im BA 4.6.38 auch die Möglichkeit implementiert sich für alle Images und den Flash das Datum der verwendenten dreambox-dvb-modules (also der Treiber) als Liste anzusehen.

    Vieleicht diese Liste einfach mal aufrufen (ba.sh check_drivers) oder im BA Plugin bem Wizzard für die installierten Images und nachdenken ob man nicht wieder was aktualisieren müsste :-)


    _http://www.sendspace.com/file/3jme6j

  15. #15
    Gforum Veterano
    Registo: Mar 2007
    Posts: 2.744

    Padrão Barry Allen for Dreambox 7020 and 600(powerpc)4.6.40

    Barry Allen for Dreambox 7020 and 600(powerpc)4.6.40

    :nt3:


    Send big files the easy way. Files too large for email attachments? No problem!

Página 1 de 8 12345 ... ÚltimoÚltimo

Tags para este Tópico

Permissões de Postagem

  • Você não pode iniciar novos tópicos
  • Você não pode enviar respostas
  • Você não pode enviar anexos
  • Você não pode editar suas mensagens
  •  

Já fez "Like" na nossa página do facebook?


Assina a nossa newsletter. Recebe todas as novidades semanais no teu email e habilita-te a ganhar premios fantasticos que temos para sortear!

* indicates required