Training to enter the BIOS Receivers Dreambox via Hyper Terminal program

In this tutorial we are using cable or RS232 cable miniusb hyper terminal and get into the BIOS Receivers Dreambox.

1- The Dream and the computer can connect to the RS232 cable or MiniUSB

2- Hold the button in front of the receiver and turn on the receiver. If you work right after a few seconds on the OLED device and so can you tone up your finger off the button.



3- Now to Start / All Programs / Accessories / Communications cut and run HyperTerminal program.

Windows 7 and Vista, Hyper Terminal program, you must download and install from here.

4- The following window appears, enter the name of my DM800 and click OK.



5- Now in the Connect To window, select the correct COM.



6- The COM1 Properties window opens and the image and click OK.



7- Now get into a white screen, after 2 seconds, press X button on the keyboard so you could change to this page.
(This only works with the keyboard, and a shift of direction for the - and + Enter to change the parameters and conditions for use)











by N@SER