OpenPLi 4.0 with 700 IPTV FREE Channels for Ferrari Japhar Sim DM500HD

OpenPLi 4.0 with 750+ Channels IPTV FREE, Team Japhar & Sim Japhar

DM800HD : https://mega.nz/#!UZszUSaR!DbtsgxVYF3sAQDVik7DUZU9LD-0ykdpHguDRZKMA0_0

DM800HDse : https://mega.nz/#!EdtRUToR!ppswZItlnRJ9WskAjj-bE1bXALr-uOHPk8v_r3YrBWA

DM500HD : https://mega.nz/#!xUEg1BIA!WjfnI5Y9dBkbMIy8YvRl2btEP1RdH6CeOl_QgrWJAo0

Users running the previous Gstreamer 1.7.0 image, should be able to peform a Software Update!

- DM8000HD+ :
https://mega.nz/#!9Q8TwRYL!hsBWZhpORoGfb52f7kdJg_k_HXtuLz6Qh_UGCpmnw1M
- DM800HDse+ :
https://mega.nz/#!5Ys30IQR!LcYjX3X8F3PexvJWjEH4POTRe1ZuaYfOAsMAGUwt5pU
- DM800HD+ :
https://mega.nz/#!8d1CgDQb!E1bd3XcpmEsDNJlYgXxmCj7Pot5B_S9VjTzvUcbZIU4
- DM500HD+ :
https://mega.nz/#!td8XzDBK!gUWZTa-087opZd9Vk50kRxzlZM7xazd35W7EjPYibiM


Changes since previous release:

- mx3L's gstreamer revert which fixes mp4 playback from remote locations
- Spark drivers updated to 20151113
- Using aio-grab from oe-alliance which includes fixes for sprak receivers
- New Japhar IPTV List (thanks to ToySoft).
- DM8000 has no more gsod's now (thanks to ToySoft for testing!)

Changes compared to openpli-oe-core gst-1:

- Ships with gstreamer upstream master git:
Using the same patches as openpli-oe-core gst-1 with only these changes:
Removed: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch
because this patch was already checked in upstream.
Added: 0001-Revert-qtdemux-respect-qt-segments-in-push-mode-for-.patch
By mx3L which fixes mp4 playback from remote locations.
- Every receiver uses christophecvr's multibox dvbmediasink.
- Using libtrmp and rtmpdump from oe-alliance.
- Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
These are only applied for Dreambox receivers.
- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
- IPTV Player from samsamsam included (thx to Athoik for the recipe).
- Large list of public IPTV streams included thanks to the Japhar Team.
- Updated libcdio and cdtextinfo for audio-cd support by christophecvr.
- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
added si2166b blindscan support
- Spark images includes the pti.ko from OpenATV so softcam's should work now.
- Using aio-grab source from oe-alliance which includes fixes for spark receivers.
- The 2.6.18 kernel will now always pass the vermagic check when loading modules.
Now you can try and load any kernel driver from OE1.5 to 2.0.

Known issues:

- DM800 first boot will take a while, please be patient. The next boot will be faster.
- On spark/spark7162 you need to set 'boxtype = dreambox' for oscam dvbapi.
We're using the OE-A drivers and 'duckbox' doesn't seem to work on these.
- On spark/spark7162 you need to set a skin which doesn't resize the framebuffer.
Because sometimes it doesn't scale back to fullscreen.
I've included the MX-HQ7 skin for use as workaround.
- On Zgemma Star you cannot use fullHD skins.
This is a hardware/driver limitation.
Please don't try it, it will crash enigma2.
- Some Dreambox remotes behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.

Dreambox DM500HD:
https://mega.nz/#!qwcTUCqS!RBkQgJLwbwp-7x-lSKywbfcmK9OKJEao90ArEJ0BWcs
Dreambox DM500HD V2:
https://mega.nz/#!Gp1jTDyR!Cdd-Ze2Gg7PonYe22byKHrprxsaPMX5AmwSi-GOWXys
Dreambox DM7020HD:
https://mega.nz/#!zh8BnKgT!nmGwvubmdXNLU47hskHMM7Rje06q-Xiw28MdA3nSKjQ
Dreambox DM800:
https://mega.nz/#!GsEQHKZK!JFRw4g6qmqdTTQUbQPMYTQMRnfx0c1vXLhIoEi2QwHo
Dreambox DM8000:
https://mega.nz/#!201GSKzb!G4cH-IQsgpdgWpeTSmXu6xHSMZStdiGKKuGzm86DKYQ
Dreambox DM800Se:
https://mega.nz/#!LtESQJ7a!MqXWfa3hK6dUM1emBkbYhM5B3npJ5_FGXg7Fn7dfFDA
Dreambox DM800Se V2:
https://mega.nz/#!X4UkyZIJ!9pI-4YR8YJSLZjbDwyBnP74_lTXxJclaArNPuBsdnr8

Xtrend ET10000:
https://mega.nz/#!ng03wD7L!Fd2ocVoCFnN5Sfxtwed2dh9IFRwNxpZPlxAfW5IJxRQ
Xtrend ET9x00:
https://mega.nz/#!vhNgURKb!ZTLyCNbvRaLoKrrBr6xiV2WpCDK4wFv2TcMp9zMPG8M
Xtrend ET8500:
https://mega.nz/#!WkE1xRTI!aC4KPGuQ3HmgkjPKHzfWTQJWhcWJlXolgPE27R-v4y0
Xtrend ET8000:
https://mega.nz/#!7ssUVCiY!ByEBciB0f722iTGBbDHmf4djug2UpH-xBFC7rf52RTo
Xtrend ET7x00:
https://mega.nz/#!LpM2nA6Q!2nFv1M8-XJEaou2GRfETbGGQAwI1oH70jZPQ2cT0FGU
Xtrend ET6x00:
https://mega.nz/#!HxdSgCbY!lyobqYEBgBMKE00GnkIz4E0yFFtgIVFhh2VZoh3uybg
Xtrend ET5x00:
https://mega.nz/#!S19gDTQL!g_woheUYusjq751liN4iGlPvOqiSApa88CsN5xqG2vM
Xtrend ET4x00:
https://mega.nz/#!yt9yybIT!Afg9O-59ZNNcSfjtYa_UrCaAybLKKZVx7rhPWAURP7I

Formuler F3:
https://mega.nz/#!z80jHaZB!q3PNSqaqq_1ijtsYN7-XoNdiaqxsK5kuv5clNryXoUY
Formuler F1:
https://mega.nz/#!Kps0zTjS!S3nW-oZxBoOHvAByvgzWYCE4hLqX3o7F5ZQ9XFvlrD0

Mut@nt HD2400:
https://mega.nz/#!z81gwIYb!8ScjiRcwRH-hSAUY_TfY3Jm-GQrwrcoyiHN2TiemBF0
Mut@nt HD1200:
https://mega.nz/#!qskT3RLa!sAx7RktstetU6gdwdREA_2ysMNfUMranynX2s_rYE4k
Mut@nt HD1100:
https://mega.nz/#!bsUzGIzS!_AKWRu_75Jj2IseukprT9mlPln4IT1BMgHspnTw4ZgM
Mut@nt HD500C:
https://mega.nz/#!b8FnlKiZ!-H83sq6ki5pcXR_GPy6JmsxjJ-LHz-dgoSkubJ4XwsU

MaxDigital XP1000:
https://mega.nz/#!X5cl1J7R!qWX6grnqq88ZfyZp2tZVe_0TF9aJOyJgVLLKXix-fas

XSarius Fusion HD:
https://mega.nz/#!qts2yB6Q!8IOeZvFxiFqNtz3CZpz5Psr_SvTuQeY1cPifjgZzIqI
XSarius Fusion HD Se:
https://mega.nz/#!XlMXXKQT!tPQ7XVWRocjj8xrrqB8YFtrIl8xG7yMB-IaetiafrII

Vu+ Solo:
https://mega.nz/#!ml9HwZCa!7e1354Px-b4mok8-B_5YGihgbCFGmzbJi6A2X6zjnQ8
Vu+ Solo 2:
https://mega.nz/#!vsdBTSIB!7fP-aeY648NSEgKk4DRdDY-FTlckbMJ703abGLg_CUc
Vu+ Solo Se:
https://mega.nz/#!flFVDKQC!F_1wqnmwQraUZiYbMwPSUjhgZZMeyTza_KfwKVBfZDM
Vu+ Duo:
https://mega.nz/#!20lHhLxL!1C1ipCAubNcEzp3lIkyH7OAntEqHykNfk_BWxTLhQHY
Vu+ Duo 2:
https://mega.nz/#!Po1THRiD!3MqGFJSZjeqbtTOCLIUJpCYhp6oGPyMLtM3S2Sbndo8
Vu+ Ultimo:
https://mega.nz/#!m9dz0aSA!YSdmyXZpbX3mH3vPCLyFjggQ6jsNGmadGG0VHX4ycto
Vu+ Uno:
https://mega.nz/#!S8FDiYTa!hksnPpsvR9gZVYSXfDmnzJfUsNW7CZfODtJKfnWwMb8
Vu+ Zero:
https://mega.nz/#!3s1iCL4B!4iHmnF_Fwn9h2Vdbx83UVxirgSJbXCiKpJNd0KmvAXs

Fulan Spark:
https://mega.nz/#!jpVwRBrI!D-rCx33eIF0VL4trehmymMZ8X-NtrODFzm9VCyLBSB8
Fulan Spark7162:
https://mega.nz/#!zwVHDarK!5WRRZrz388_GGH9Zbyi-sZaArSToeucfvZpNK-ursUU

AirDigital Zgemma Star S / H1 / H2 / 2S:
https://mega.nz/#!P0VQUAaR!0zyA-p5P_LkyHRnAlhfdAj5jCBvV0o5GhmCdyd5lslg
AirDigital Zgemma Star HS / H2S / H2H:
https://mega.nz/#!XkMyEBjL!NjUUG9AuF_ohQJf_ItIk6bjzntV_27rkqoEM6llV6DI

OEM:

- DM8000HD+ :
https://mega.nz/#!9Q8TwRYL!hsBWZhpORoGfb52f7kdJg_k_HXtuLz6Qh_UGCpmnw1M
- DM800HDse+ :
https://mega.nz/#!5Ys30IQR!LcYjX3X8F3PexvJWjEH4POTRe1ZuaYfOAsMAGUwt5pU
- DM800HD+ :
https://mega.nz/#!8d1CgDQb!E1bd3XcpmEsDNJlYgXxmCj7Pot5B_S9VjTzvUcbZIU4
- DM500HD+ :
https://mega.nz/#!td8XzDBK!gUWZTa-087opZd9Vk50kRxzlZM7xazd35W7EjPYibiM

Sim2 DM800Se:
https://mega.nz/#!m8kkyAjI!d-l0k8NAMDxs2IktSfTMXIR74BOvUznNaNmLRcovBCU
Sim2 DM800Se V2:
https://mega.nz/#!XwUAmZ5T!RJXQZa4O5mSHU48MK4A6xuvYbcYZUExjanz_9nPoSb4
Sim2 DM800:
https://mega.nz/#!ulMhkLSD!8rbKgFpr280R46x_yyUzvYUtQZ1eflV0xZH5dnc-yxc
Sim2 DM500HD:
https://mega.nz/#!nk0BHDLR!Zjaq10CDDXT2j6VrQ71MGftotZB3SkjcJXJayb5yFUo

E-Star DM800Se:
https://mega.nz/#!P40RAQBR!-WmxWD_E1wry3zBrCRf-mxm6O4jVNfnr4lcYFzeVfaA
E-Star DM800 (untested):
https://mega.nz/#!r8NhSBYI!VdTlc7Eg615vhdIhp4riW6646LWNnB0qlylEp5r9XyE

Changes :
- Gstreamer 1.7.1
The mp4 playback from remote urls has been fixed upstream so no more revert for that.
libsoup http-handler has been updated so also no revert for that as well
- New libsoup handler for http urls
- New winter logo
- More free space laugh
Ive added a dirty hack that will upx compress the binary before package_write_ipk
We now have 2 to 3MB more free space (very nice, great success)
- New xvid/divx5 bitstream unpacker by mx3L, this should fix avi files with wrong fourcc
- The usual batch of dvbmediasink fixes by christophecvr and mx3L
- Wifi drivers have been refactored a bit, I dont auto-load the rt7777 anymore.
it should kick in when you plugin your wifi stick.
If not then Ill create a ppanel which will allow you to choose which driver you want to use: rt3070, rt55xx or rt7777 (since they cant be loaded at the same time)

by MastaG

DM8000HD: https://mega.nz/#!YRklVADa!jfV_0mM-6mvH1Gq5WGFs9-MdezwoUzLFubOFmA7VCAg

DM800HDse : https://mega.nz/#!BAtCwQ4R!r15VnQlfKONB-7ieoU7CZvaK5SOaenDNfLsp9CQBYbU

DM800HD : https://mega.nz/#!kYlVHRoD!pWuty-xvlEvNKK-8JhdvNgPFs4-rj6iGabO8Dk77bno

DM500HD : https://mega.nz/#!VMcAyQwC!Z4CxifG_3KpZ7EgULXs3KUQWp0Z88GSS8MW90MLYBkc


Feel free to post images on all your satellite forums you like and share with all your friends these excellent tools and new images with full IPTV support, the best around, even better than on original boxes !!! Thank you !

OpenPLi 4.0 DM500HD






OpenPLi 4.0 by MastaG with IPTV (1200+ FREE IPTV Channels) for Japhar NC3 SuperSim3

Users running the previous image can update online and will gain the latest Gstreamer 1.7.90 Pre-Release
Changes since last release:
- gstreamer upgraded to 1.7.90 (nearing the final 1.8 release)
- ffmpeg updated to 3.0
- gstreamer1.0-libav is now build against ffmpeg (thx to Taapat).
- a patch from mx3L for servicemp3 that should speed up IPTV zapping
- a second patch from mv3L for servicemp3 that should fix a possible GSOD when switching audio tracks
- a third patch from mx3L for the dvbmediasink that should fix a possible GSOD on seeking in mp4 streams
- support for bluray isos by Taapat
- remote controls should now have their media-button working
- added X Solo Mini 3 build
- New vermagic magics, you should be able to load any kernelmodule again.
- patch by christophecvr for setting the debug level in Menu -> Settings -> User-interface settings
Note :
The patch for setting the debug level is very important since it fixes many possible IPTV issues on slower receivers like the DM800.
Its highly recommended to set it level 0



https://mega.nz/#!BFMkkS7S!g9BZUfwBYpaNE4APwcZXOb4cBcafy3vPuBljxXwnM0s

VU+/DM Japhar OpenPLi 4.0 IPTV image from MastaG, 1300 Free IPTV Channels



Here s a new batch of images based on OpenPLi 4 with many contributions from various openpli.org forum members and some bits taken from oe-alliance.

So this is basically a tribute to them

IMG01

It took me a while since I was very short on time and I had to re-install my build-rig, move to a new feed-server etc...

SO DUE TO A NEW FEED-SERVER ONLINE UPDATE FROM PREVIOUS IMAGES IS NOT POSSIBLE!
DON T TRY TO CHANGE THE URL IN THESE OLD IMAGES SINCE THERE S BEEN TOO MANY CHANGES WHICH WILL BREAK THINGS!
PLEASE FLASH A CLEAN IMAGE INSTEAD!

So here s whats up:
- Brand new bootlogo thanks to .:MarcinO:.
- OpenPLi enigma2 rev: 4bf2f1e45593065f9e2b4563f30463487b727c94
- OpenPLi oe-core rev: d76cfe6a39c6613ac77578840b214f0f1e748a39
- Taapat s Fulan enigma2 rev: 2a984c500f5b2ea657f68742b7dc4e47f5586483
- New receivers supported:
* osmini
* osminiplus
* spycat
* spycatmini
* et7000mini
* xpeed lx
* xpeed lx pro

- New feed server located in Europe thanks to the Japhar team!
- New Japhar IPTV list
- No more use of UPX compression on ARM platform (should fix the Vu+ Solo 4K build)
- Latest gstreamer 1.9 revision from master branch
- FFmpeg 3.0.2 with extra options enabled (based on oe-e recipe)
- Kodi 16.1 for Vu+ Solo 2, Solo Se, Duo 2, and Solo 4K (thanks to mx3L for his bsp + recipes)
- More wifi drivers (mt7601, rt7777 etc..) taken from oe-alliance
- Slightly newer v4l modules for kernel 2.6.18 (dm800)
- New version of mx3L s serviceapp now supports EPG and embedded subtitles
- New version of exteplayer3
- Flash extender PPanel for dm800, dm800se and dm500hd (* Please read below)
- Many other changes I forgot to mention...

Known issues:
- On spark7162 (and 7111 probably as well) fragmented streams such as hls (m3u8) will skip and freeze a lot.
This happened sometime after the official Gstreamer 1.8.0 release and I didn t found the cause yet.
It is not related to the dvbmediasink since it doesn t happen on mips receivers and the code in the dvbmediasink didn t change.
Configure your streams to play with exteplayer3 instead, read below.

- Some Dreambox remotes may behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.

- DM800 first boot will take a while, please be patient. The next boot will be faster.


Flash extender for DM800, DM800Se and DM500HD:
Since these receiver only feature 64MB of internal flash space, I ve been unable to ship all packages.
ffmpeg, exteplayer3, gst1.0-libav, mediaplayer2, iptv player, subssupport etc.. are missing due to insufficient space.
That s why I ve created a simple PPanel script for moving the entire internal flash to an external storage device such as internal hdd or usb disk.
The PPanel will also install all the missing packages for you.
So you can have all the bells and whistles like the other receivers

IMG02

However please note that:
- It will format your storage device thus deleting everything.
- It s not compatible with other flash-extenders such as barry alen, multiboot etc...
- You ll need a working internet connection when running the PPanel or else it cannot install the missing packages.
- You need to patient! As the script runs you ll only see a black screen which an take up to 15 minutes depending on the size/speed of your storage device and your internet connection.

You can find it under Blue Panel -> PPanels

ServiceApp and exteplayer3:
Thanks for the hard work from mx3L and samsamsam you can now play your IPTV streams with exteplayer3 or gstplayer instead of the default dvbmediasink.
Especially using exteplayer3 will give much better performance on playing HLS streams compared to gstreamer + dvbmediasink.
For example, playing DJING underground 720p never worked very well on my DM800HD and now it does

In a nutshell here s how it works.
In your /etc/enigma2/ directory you have your channel bouquets with the .tv and .radio extensions.
Inside these files there s this for example:

#SERVICE 4097:0:0:0:0:0:0:0:0:0:http%3a//cdn.djing.com/tv/u-05.m3u8JING Underground (CDN)
#DESCRIPTION DJING Underground (CDN)

By default this will play with the gstreamer dvbmediasink (which is currently broken for sh4).
If you like to play your stream with exteplayer3 instead you should change the 4097 to 5002, like this:

#SERVICE 5002:0:0:0:0:0:0:0:0:0:http%3a//cdn.djing.com/tv/u-05.m3u8JING Underground (CDN)
#DESCRIPTION DJING Underground (CDN)

You can also change it to play with gstplayer using 5001:

#SERVICE 5001:0:0:0:0:0:0:0:0:0:http%3a//cdn.djing.com/tv/u-05.m3u8JING Underground (CDN)
#DESCRIPTION DJING Underground (CDN)

So it s like this:
4097 = default player, which is the dvbmediasink if serviceapp is not enabled
5001 = gstplayer
5002 = exteplayer3

Now let s say you d like to convert your entire bouquet to play with exteplayer3, simply login to your receiver with telnet/ssh (use PuTTY for Windows).
And issue to the following commands:
First stop enigma2:

init 4

Then change your bouquet to make all streams play with exteplayer3, lets say userbouquet.favourites.tv:

cd /etc/enigma2
sed -i s/^#SERVICE 4097/#SERVICE 5002/g userbouquet.favourites.tv

Then restart enigma2:
init 3

That s it !

You can also make exteplayer3 the default backend for playing back everything.
Go to Menu -> Plugins -> ServiceApp and set exteplayer3 as default.

Keep in mind that with exteplayer3 or gstplayer as default backend you will not have support for external subtitles yet (.srt for example).

That s why I ve added MediaPlayer2 and SubsSupport from mx3L.

Please thank mx3L for the hard work he put into this

- Japhar

DM500HD+ : https://mega.nz/#!3VBXEDhR!xrobDWOeMrFgCqRQTfUSuKlXepof6fB2TcAtv3v6pYA
DM800HD+ : https://mega.nz/#!nVhQnZYZ!H56CtR356FiFOmM5KesFiSdWv1qTcJemhCY96V53JME
DM800HDse+ : https://mega.nz/#!nVQFSKbL!ZebU1ZuMEPz275PAyBCV1CV8KcyDKgr295oOS7u9OnM
DM8000HD : https://mega.nz/#!eFhUmJYZ!SuirJs7XPJ7mrJ32NHblmy_2IOGnIPC4zc8s_eGNfLE