DM800 release candidate 20090310
Description:
changelog DM800 release 20090310
enigma2/plugins (rel2.4 20081025 -> rel 2.5 20090303)
---------------
cosmetical changes
translation fixes and updates
don't rely on hdd standby timer, but manage own idle timer.
fix playback of media files (last few seconds of a file did not play)
DVB-T scan fixes
dont clear terrestrial and cable transponders when not needed
filter
and in short description title
filter illegal (newline) characters to fix Dr.Dish TV records
better handling for non-accessible directories
use default record path when current doesnt exist
fix standby for hardware without scart switch
add check for invalid fec in cable delivery descriptor
some DiSEqC(tm) fixes (fix "tune failed" problems with some diseqc switches)
fix pro7 'vpts did not increase when seeking'-bug (this fixes skipping > 8x in SD recordings)
DVB subtitle fixes
teletext subtitle fixes
aspectratio/Framerate/Progressive stuff fixes
internal epgcache title search fixes
allow separate configuration of aspect ratio
cache movie filelengths in .meta file
fix playback of "original" video-cds
support much more audio/video codecs encapsulated in TS files (not all stb hardware can handle all codecs!!!)
dont use pat/pmt when the dxNoDVB Flag is set
LNB Config fixes
add Support for DVB-S2 in satfinder and positioner setup
timer fixes
add timer conflict checking
code cleanups and performance fixes
fix id3 tag reading on MP3s
tuner snrdb calculation fixes
add possibility to change start/end time in timer edit with Vol/Bouquet +/-
add m4a as audio extension
GraphMultiEpg fixes
add possibility to always switch to 13V before do sec commands
decode id3 cover art images embedded into mp3 files and show them in mediaplayer
picload.cpp: fix 32bpp pngs
allow setting tags from timer menu
allows to configure the path for timeshift recordings via gui
add possibility to set Pilot also for DVB-S2 non 8PSK Transponders (i.e. the new Euro1080 Transponder on 7�E)
networkConfig / nameserver fixes
mediaPlayer: fix imports, introduce config and settings screen for repeat playlist, save playlist on exit and default start directory, implement file delete.
add possibility to change delay after diseqc reset command and delay after diseqc peripherial poweron command via satellite equipment control plugin
fix non working option "Set Voltage and 22KHz"
more flexible diseqc / sat config
long keypress on INFO key either brings up single servie EPG view screen like right now or, if any plugins of new type WHERE_EVENTINFO are installed like GraphMultiEPG
timer sanity check fixes
some stability fixes
fix coverart displaying, allow using cover art with all different image formats, remove some debug prints
allow reading jfif embedded exif thumbnails from jpeg files and use them to speed up thumbnail view in pictureplayer plugin
add virtual keyboard as easy input help (currently used in NetworkConfig/Wlan Setup)
add .mp2 as supported filetype
fix non working timer disable for recurring timers
add flac and mp4 support
better h264 compatibility
some subtitles fixes for mediaplayback
some hotplug fixes
drivers (20080605 -> 20090310)
------------------------------
add support for auto pilot tone (dvb-s2)
add possibility to set oled contrast and brightness
add mp3 hardware decode support
add support for dream keyboard
add 2nd policy for video content > 16:9
add support for h264 cinemascope video content
add some changes for the autoresolution plugin
add possibility to select hdmi colorspace via /proc/stb/video/hdmi_colorspace
add support for pilot tone for all lpdc modes not only for 8psk
add possibility to set fallback framerate ... for better mediaplaying support
fix left/stereo/right settings for hdmi output
fix tone_amplitude setting for alps-bsbe2 frontend again
fix wss signal on parallel cvbs out
fix some scaling problems
fix remote control layer 3 and 4
fix some demux problems
fixed some ac3 problems
fixed some DVI problems
fixed some smartcard reader problems
improved stability
improved remote control sensibility
improved picture quality with interlaced output modes
dvb-c / dvb-t frontend driver optimizations
higher demux bandwith to support more HD recordings at the same time
faster channel change with dvb-c frontend
lower mem consumption by drivers .. so we have now 160MB for linux
Description:
changelog DM800 release 20090310
enigma2/plugins (rel2.4 20081025 -> rel 2.5 20090303)
---------------
cosmetical changes
translation fixes and updates
don't rely on hdd standby timer, but manage own idle timer.
fix playback of media files (last few seconds of a file did not play)
DVB-T scan fixes
dont clear terrestrial and cable transponders when not needed
filter
and in short description title
filter illegal (newline) characters to fix Dr.Dish TV records
better handling for non-accessible directories
use default record path when current doesnt exist
fix standby for hardware without scart switch
add check for invalid fec in cable delivery descriptor
some DiSEqC(tm) fixes (fix "tune failed" problems with some diseqc switches)
fix pro7 'vpts did not increase when seeking'-bug (this fixes skipping > 8x in SD recordings)
DVB subtitle fixes
teletext subtitle fixes
aspectratio/Framerate/Progressive stuff fixes
internal epgcache title search fixes
allow separate configuration of aspect ratio
cache movie filelengths in .meta file
fix playback of "original" video-cds
support much more audio/video codecs encapsulated in TS files (not all stb hardware can handle all codecs!!!)
dont use pat/pmt when the dxNoDVB Flag is set
LNB Config fixes
add Support for DVB-S2 in satfinder and positioner setup
timer fixes
add timer conflict checking
code cleanups and performance fixes
fix id3 tag reading on MP3s
tuner snrdb calculation fixes
add possibility to change start/end time in timer edit with Vol/Bouquet +/-
add m4a as audio extension
GraphMultiEpg fixes
add possibility to always switch to 13V before do sec commands
decode id3 cover art images embedded into mp3 files and show them in mediaplayer
picload.cpp: fix 32bpp pngs
allow setting tags from timer menu
allows to configure the path for timeshift recordings via gui
add possibility to set Pilot also for DVB-S2 non 8PSK Transponders (i.e. the new Euro1080 Transponder on 7�E)
networkConfig / nameserver fixes
mediaPlayer: fix imports, introduce config and settings screen for repeat playlist, save playlist on exit and default start directory, implement file delete.
add possibility to change delay after diseqc reset command and delay after diseqc peripherial poweron command via satellite equipment control plugin
fix non working option "Set Voltage and 22KHz"
more flexible diseqc / sat config
long keypress on INFO key either brings up single servie EPG view screen like right now or, if any plugins of new type WHERE_EVENTINFO are installed like GraphMultiEPG
timer sanity check fixes
some stability fixes
fix coverart displaying, allow using cover art with all different image formats, remove some debug prints
allow reading jfif embedded exif thumbnails from jpeg files and use them to speed up thumbnail view in pictureplayer plugin
add virtual keyboard as easy input help (currently used in NetworkConfig/Wlan Setup)
add .mp2 as supported filetype
fix non working timer disable for recurring timers
add flac and mp4 support
better h264 compatibility
some subtitles fixes for mediaplayback
some hotplug fixes
drivers (20080605 -> 20090310)
------------------------------
add support for auto pilot tone (dvb-s2)
add possibility to set oled contrast and brightness
add mp3 hardware decode support
add support for dream keyboard
add 2nd policy for video content > 16:9
add support for h264 cinemascope video content
add some changes for the autoresolution plugin
add possibility to select hdmi colorspace via /proc/stb/video/hdmi_colorspace
add support for pilot tone for all lpdc modes not only for 8psk
add possibility to set fallback framerate ... for better mediaplaying support
fix left/stereo/right settings for hdmi output
fix tone_amplitude setting for alps-bsbe2 frontend again
fix wss signal on parallel cvbs out
fix some scaling problems
fix remote control layer 3 and 4
fix some demux problems
fixed some ac3 problems
fixed some DVI problems
fixed some smartcard reader problems
improved stability
improved remote control sensibility
improved picture quality with interlaced output modes
dvb-c / dvb-t frontend driver optimizations
higher demux bandwith to support more HD recordings at the same time
faster channel change with dvb-c frontend
lower mem consumption by drivers .. so we have now 160MB for linux
Código:
http://rapidshare.com/files/207973616/release-candidate-dm800_20090310.rar