JackWise
GF Ouro
- Entrou
- Set 25, 2006
- Mensagens
- 5,490
- Gostos Recebidos
- 0
Virtual Server 2005 R2 System Requirements
Most software you install has a minimum set of requirements that must be met first. Virtual Server 2005 R2 is no exception. The computer that you are installing R2 on (also referred to as the host computer) must meet a set of minimum hardware and software requirements before you can begin setup.
The minimum hardware requirements include:
550 MHz process with L2 cache (1 GHz is recommended)
CD-ROM or DVD drive
Super VGA or higher
256 MB of RAM (512 MB is required if you are running SBS 2003 Premium Edition or Windows Server 2003 Datacenter Edition)
2 GB of free disk space (4 GB is required if you are running SBS 2003 Standard or Premium Editions
The host operating systems that Virtual Server 2005 R2 can be installed on includes:
Microsoft Windows Server 2003, Standard Edition
Microsoft Windows Server 2003, Enterprise Edition
Microsoft Windows Server 2003, Datacenter Edition
Microsoft Windows Small Business Server 2003
Microsoft Windows XP Professional
You also need to consider the guest operating systems that you can actually run inside a virtual machine. VS 2005 R2 supports most versions of Windows including all versions of Windows Server 2003 and Windows 2000 Server, with the exception of the Datacenter varieties, and Windows NT 4.0 SP6a.
Finally, if you plan on running the Administration Web site on the computer, you are also going to have to install Internet Information Services (IIS).
Install Virtual Server 2005 R2
Assuming that your computer meets all the hardware and software requirements for Virtual Server 2005 R2, you can proceed with the installation steps that are described below.
Completing these steps will install both the Virtual Server service and the Administration Web site.
Insert the Virtual Server CD-ROM to launch the Setup Wizard. The wizard can also be started manually using setup.exe.
Click through the wizard until you reach the Setup Type page.
Select Complete. This installs Virtual Server using the default configuration. Click Next.
On the Configure Components page, either accept the default Web site port of 1024 or type in a new port number. Click Next.
Accept the default option to Configure the Administration Web site to always run as the authenticated user, or select Configure the Administration Web site to always run as the Local System account. Click Next.
Click Enable Virtual Server exceptions in Windows Firewall if users will access the virtual server through Windows Firewall. Click Next.
Click Install.
Click Finish when the Setup Complete page appears.
Most software you install has a minimum set of requirements that must be met first. Virtual Server 2005 R2 is no exception. The computer that you are installing R2 on (also referred to as the host computer) must meet a set of minimum hardware and software requirements before you can begin setup.
The minimum hardware requirements include:
550 MHz process with L2 cache (1 GHz is recommended)
CD-ROM or DVD drive
Super VGA or higher
256 MB of RAM (512 MB is required if you are running SBS 2003 Premium Edition or Windows Server 2003 Datacenter Edition)
2 GB of free disk space (4 GB is required if you are running SBS 2003 Standard or Premium Editions
The host operating systems that Virtual Server 2005 R2 can be installed on includes:
Microsoft Windows Server 2003, Standard Edition
Microsoft Windows Server 2003, Enterprise Edition
Microsoft Windows Server 2003, Datacenter Edition
Microsoft Windows Small Business Server 2003
Microsoft Windows XP Professional
You also need to consider the guest operating systems that you can actually run inside a virtual machine. VS 2005 R2 supports most versions of Windows including all versions of Windows Server 2003 and Windows 2000 Server, with the exception of the Datacenter varieties, and Windows NT 4.0 SP6a.
Finally, if you plan on running the Administration Web site on the computer, you are also going to have to install Internet Information Services (IIS).
Install Virtual Server 2005 R2
Assuming that your computer meets all the hardware and software requirements for Virtual Server 2005 R2, you can proceed with the installation steps that are described below.
Completing these steps will install both the Virtual Server service and the Administration Web site.
Insert the Virtual Server CD-ROM to launch the Setup Wizard. The wizard can also be started manually using setup.exe.
Click through the wizard until you reach the Setup Type page.
Select Complete. This installs Virtual Server using the default configuration. Click Next.
On the Configure Components page, either accept the default Web site port of 1024 or type in a new port number. Click Next.
Accept the default option to Configure the Administration Web site to always run as the authenticated user, or select Configure the Administration Web site to always run as the Local System account. Click Next.
Click Enable Virtual Server exceptions in Windows Firewall if users will access the virtual server through Windows Firewall. Click Next.
Click Install.
Click Finish when the Setup Complete page appears.