helldanger1
GForum VIP
- Entrou
- Ago 1, 2007
- Mensagens
- 29,631
- Gostos Recebidos
- 1
1. System requirements:
VAGTACHO.EXE is a Windows based program that will work on any PC or laptop that has installed Microsoft Windows 98, 2000, ME, XP.
Hardware requirements:
Any PC or laptop with Pentium / 133MHz processor or higher, and a free USB port.
2. USB Drivers installation:
Caution: This hardware interface requires drivers installation to work!
Please use only drivers that are supplied with this product. There are no other or better drivers.
For all Windows XP users:
Please disconnect your PC or laptop from Internet before install drivers !
Don't use Windows 'original' drivers! This is important!
How to install drivers:
Connect OBD interface to any free USB port. This will start Windows procedure to install drivers for the new hardware found. Tell to Windows where the drivers are on your harddisk.
If Windows tells you that the driver is not certified by Microsoft just confirm that you want to install it anyway.
How to uninstall drivers:
If you wish to uninstall drivers, go to control panel and uninstall drivers with standard procedure.
3. How to work with the software:
Connect OBD connector to car diagnostic socket.
Then connect hardware interface to any free USB port of your PC or laptop.
Start program VagTacho.exe. Select ECU from menu. If you don't know type of kombiinstrument, press 'Connect Any Tacho' button. Program will try to connects any kombi and will display type of kombiinstrument. Then press disconnect, and select appropriate ECU from menu. There is no problem if you do wrong selection, but all other functions will work only if you select right ECU. After selecting ECU, press "Connect Selected ECU" button.
If everything is OK after 5 seconds you will see kombi info on display and program will try
to log in to the ECU. After successful procedure, all useful buttons on screen will be enabled.
4. Commands:
4.1 Select ECU from Menu
This option selects type of ECU that user will try to connect.
* (There is selections for VW/Seat/Skoda immo box. It is usefull only if you have an already working key, and switch ignition ON with this key. Works only for Immo1 type immobilizers! )
4.2 File
User can save and read files to / from program memory buffer.
4.3 Connect any tacho button
By pressing this button user can connects to kombi, and read info for any car's kombiinstrument.
This is useful when type of kombi is unknown.
4.4 Connect Selected ECU
By pressing this button user will connects kombi or immo box which is selected from menu.
4.5 Read Info
After pressing this button, program will shows ECU info. Press it twice to read whole information.
4.6 Read PIN
Program will try to read PIN code for log in to the selected ECU. If the operation was successful,
PIN code will be shown on display.
4.7 Change Mileage
ver o resto no manual (Anexo)
VAGTACHO.EXE is a Windows based program that will work on any PC or laptop that has installed Microsoft Windows 98, 2000, ME, XP.
Hardware requirements:
Any PC or laptop with Pentium / 133MHz processor or higher, and a free USB port.
2. USB Drivers installation:
Caution: This hardware interface requires drivers installation to work!
Please use only drivers that are supplied with this product. There are no other or better drivers.
For all Windows XP users:
Please disconnect your PC or laptop from Internet before install drivers !
Don't use Windows 'original' drivers! This is important!
How to install drivers:
Connect OBD interface to any free USB port. This will start Windows procedure to install drivers for the new hardware found. Tell to Windows where the drivers are on your harddisk.
If Windows tells you that the driver is not certified by Microsoft just confirm that you want to install it anyway.
How to uninstall drivers:
If you wish to uninstall drivers, go to control panel and uninstall drivers with standard procedure.
3. How to work with the software:
Connect OBD connector to car diagnostic socket.
Then connect hardware interface to any free USB port of your PC or laptop.
Start program VagTacho.exe. Select ECU from menu. If you don't know type of kombiinstrument, press 'Connect Any Tacho' button. Program will try to connects any kombi and will display type of kombiinstrument. Then press disconnect, and select appropriate ECU from menu. There is no problem if you do wrong selection, but all other functions will work only if you select right ECU. After selecting ECU, press "Connect Selected ECU" button.
If everything is OK after 5 seconds you will see kombi info on display and program will try
to log in to the ECU. After successful procedure, all useful buttons on screen will be enabled.
4. Commands:
4.1 Select ECU from Menu
This option selects type of ECU that user will try to connect.
* (There is selections for VW/Seat/Skoda immo box. It is usefull only if you have an already working key, and switch ignition ON with this key. Works only for Immo1 type immobilizers! )
4.2 File
User can save and read files to / from program memory buffer.
4.3 Connect any tacho button
By pressing this button user can connects to kombi, and read info for any car's kombiinstrument.
This is useful when type of kombi is unknown.
4.4 Connect Selected ECU
By pressing this button user will connects kombi or immo box which is selected from menu.
4.5 Read Info
After pressing this button, program will shows ECU info. Press it twice to read whole information.
4.6 Read PIN
Program will try to read PIN code for log in to the selected ECU. If the operation was successful,
PIN code will be shown on display.
4.7 Change Mileage
ver o resto no manual (Anexo)