Official Wu solo Image Backup 5.10 @ isayuksel

First, download the latest version of the new image to usb cihazımıza installing: Installation Instructions for the picture Vu + Solo USB Stick

After the setup wizard after installing the software is encountered. At this stage I'm only language choice. Other transactions without getting out of the wizard.
Quote:

Turkish language was chosen.

We check our config for the network.

Menu> Setup> System> Network section of the "Network hardware settings," pointing to the kumandamızın "OK" button is pressed.
User Interface: yes
Use DHCP: yes

We take note of the IP address of your current settings section.

If the link I gave about the network setup problem can examine this topic: Vu + wired / wireless network settings and the test is

Channel List in order to install I need to do some adjustments.

Menu => System => Customize section of the user experience, "expert" as a change. Yet at the same place;
(Menu => System => Customize section) Enable the use of multi-bouquet "yes" as a change. Kumandamızın green button to save the changes (OK) is pressed.

Again, the channel setting, install, and we can do with the computer for other tasks "Webinterface" needs to create plug-in.

For this
Menu => Accessories => Green Button (Download Extension) a is pressed.
Extension information indiriliyor.Lütfen wait ... Extensions into categories will be displayed after a period of warning.

Here, under the extensions section "Webinterface" plug-in came on the OK button is pressed kumandamızın. "Extensions-Webinterface" Would you like to download the plug-in? will come in the form of a message. While on the yes option kumandamızın "OK" button is pressed.

"Practice is over the text" key to exit kumandamızın are going to see.



Now we can install Settingimizi Channel: 4 Channel List to take with a different method (book).

Quote:

Twin VU + Duo & Solo & ET-9000 HDTV channel in the channel settings in the Setting loaded. @ Galaxy2002

Be sure to reboot after installing the device to the channel settings.

Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.

Quote:

Tuner A: (simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °

Note: Notice that the first channel after you install the tuner ayarlamızı have made our list. Thus, due to the possible setting names of different satellites, the satellite broadcasts, we have prevented errors that can be taken.

We want to use the system of plugins and other add-ons are building the system. But first, "SoftwareManager" (Software Management) plug-in from scratch.
Downloadable add-ons => systemplugins under the "SoftwareManager" kumandamızın come on "OK" button is pressed. "Systemplugins-softwaremanager" Would you like to download the plug-in? will come in the form of a message. While on the yes option kumandamızın "OK" button is pressed.

"Practice is over the text" key to exit kumandamızın are going to see.

Us to establish this, more add-ons management (more options and removing add-ons) will provide the opportunity. In addition, there are also some of the features. For now I will not discuss them.

Quote:

İndirlebilir add-ons => systemplugins under the "SoftwareManager" was established.


Menu => Add-ons section when we will begin to realize Changeable. Red button (Manage Add-ons) will be first noticed Changeable. Add-up and drop-down menu and we will remove the red key now.


Menu => Add-ons section of the press to come Kumandamızın Red (Add-ons) is pressed. I updated the software catalog on the screen, a message system for a while after their stay at the plugins will be listed in categories. When you press the OK button on your remote control by pointing to the categories of any plug-ins will be listed in that category. Fainter ones installed plugins are installed here. You want to install (or you want to remove), add-ons you can mark (or remove).

We are under the System category, "StartUpService" i, under the direction of the image "videmode" plug-ins are choosing. With red button (back), she next to the red button (Close) are going. "Add-on Management activity information" window, choose Add-In (s) will be seen. In the meantime, we press the OK button kumandamızın installation (or removal) will start. Install (or uninstall) after the operation you want to restart istemedğimiz tamamalandığı and a window will pop up on the question. "Yes" by pressing the OK button while on the Kumandamızın provide our device from restarting.



When we started re-opening the connection with the reason we set up our device videomode plugin settings will be related to the shape and resolution.

Quote:

HDMI is selected.
1080i was chosen

Image configuration.

Quote:

Menu> Setup> System> Audio / Video settings section to come
4:3 content is as follows: Just Scale
> 16:9 content is as follows: Just Scale
changed. Green Key (OK) were recorded with the changes.

When you want to set up as external plugins. Ipk file via ftp / tmp directory, take, then give the following telnet command to restart the device, and finally enough.

Code:
ipkg install / tmp / *. ipk

Quote:

Established TSpanel 2.0.
TS Emu Manager section of the panel were virtually Kumandamızın blue button (Download) 2.2.1 cccamd hovering over the drop-down menu and select the OK button kumandnaın was setup.

CCcam.cfg file / etc folder is located under. Server uses this knowledge to the file server need not to enter.



Quote:

Hacksat-Keys-downloader-e2_1.1-30102010_mipsel.rar download and update k.ey do.
To set up Hacksat telnette
Code:
Export MALLOC_CHECK_ = 0
ipkg install-force-overwrite / tmp / Hacksat *
give the command.
If the installation fails again, try to give the following command:
Code:
ipkg update


Quote:


Blindscan under the System category,
Setpassd under the System category,
VlcPlayer under the Software category,
Autoresolution under the Multimedia category,
MyTube established under the Multimedia category.

Quote:

Time Zone: (GMT +02:00) Athens, Istanbul, Minsk
set as the startup service: Channel D