aguda
GF Ouro
- Entrou
- Ago 28, 2007
- Mensagens
- 19,102
- Gostos Recebidos
- 2
Pli Image 2.1 backup @isayuksel
Pli image 2.1 (26\07\2011) backup by @isayuksel
First, a new image for usb download the latest version of the Pli cihazımıza Official Site from installing: (1) Vu + Duo USB with the image install is
Needs to be done after the installation, after installation, settings:: (2) Vu + Duo first setup settings
Seçilidi HDMI.
1080i is selected.
Turkish language was chosen.
Can I search for channels or channel list at this point we can install ready. If you want to make a call before you need to do is channel tuner settings.
To search for detailed information about the channel: (4) Vu + Duo-channel search and bookmark create
We check our config for the network.
Menu> Setup> System> Network section of the "Network hardware settings," pointing to the kumandamızın "OK" button is pressed.
Under the section for the current settings to take note of the IP address. (Channel settings will need to install the editor not to enter the value of the rope.)
If the link I gave about the network setup problem can examine this topic: Vu + wired / wireless network settings and the test is
Now we can install Settingimizi Channel: 4 Channel List to take with a different method (book).
Twin VU + Duo & Solo & ET-9000 HDTV channel in the channel settings in the Setting loaded. @ Galaxy2002
Be sure to reboot after installing the device to the channel settings.
Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.
Tuner A: (simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
Tuner B: (advanced) DisegC 1.1: 42 ° / 13 / ° 7 ° / 19.2 ° / 23.5 ° / 39 ° / 9 ° / 4.8 ° / 16 °
Note: Notice that the first channel after you install the tuner ayarlamızı have made our list. Thus, due to the possible setting names of different satellites, the satellite broadcasts, we have prevented errors that can be taken.
Menu> Setup> System> Audio / Video settings section to come
4:3 content is as follows: Just Scale
> 16:9 content is as follows: Just Scale
changed. Green Key (OK) were recorded with the changes.
Time Zone: (GMT +02:00) Athens, Istanbul, Minsk
set as the startup service: Channel D
Menu => Add-ons section of the press to come Kumandamızın Green (Add-on Download) is pressed. Downloading plug-in information ... Please wait ... The system may display a message in the form of plugins into categories will be listed after their stay. When you press the OK button on your remote control by pointing to the categories of any plug-ins will be listed in that category.
Add-on manager;
Autoresolution systemplugins under the category,
fullbackup systemplugins under the category,
under systemplugins Setpasswd (The password is assigned),
softwareupdate systemplugins under (4.6)
videoenchancement systemplugins under the category,
apletrailer under category extensions,
bitrateviewer under category extensions,
cccaminfo under category extensions
mediacenter under category extensions,
MyTube under category extensions
permanentcloc under category extensions (not active)
pipzap under category extensions
simplerss under category extensions (supply address has been entered),
under category extensions Sherlock (help, press),
subtitleplayer under category extensions (3.05),
virtualzap under category extensions (arrow key, press and hold)
vlcplayer under category extensions
weatherplugin under category extensions
youtubeplayer under category extensions
established under softcams ccam 2.2.1.
When you want to set up as external plugins. Ipk file / files via ftp / tmp directory after a workout telnette give the following command:
Code:
opkg install / tmp / *. ipk
Restart your device after installation of the plugin.
enigma2-plugin-extensions-dreamexplorer_7.2_mipsel.ipk was downloaded.
WebMedia plugin was downloaded.
EPG Exporter plugin (7E -> 42E EPG solution for the final transfer!) ... Was the subject of using the EPG Exporter plugin (v3.0) @ exenonline
EPG was founded Turkish Character Correction plugin. (V3.0) @ exenonline
3.3 TS panel was established.
tunisiasat manager_3.0 download-addons-founded.
Menu => Accessories => tunisiasat manager_3.0 e-addons-come first livefootball (3.0 b), then the plugins tunisiasat "Netradioturk_2.6-b" and finally under the CCcam Info plugin was V1.3c
Hacksat-Keys-downloader-e2_1.1-30102010_mipsel.rar download and installation are doing.
To set up Hacksat telnette
Export MALLOC_CHECK_ = 0
opkg install-force-overwrite / tmp / Hacksat *
give the command.
Our device came after restarting the plugin by running the plug-ins are making k.ey update.
Note: After updating your device Hacksat k.ey with the switch turn on and off the back of the event error was corrected in the new version.
CCcam.cfg file / etc folder is located under. Server uses this knowledge to the file server need not to enter.
Note: Sometimes the startup state of inability to rope there. In this case, the menu> Setup> System> Network> Network and restart your network may require restart.
Pli Images Backup @isayuksel.usb
Pli Images Backup @isayuksel.nfi
Pli image 2.1 (26\07\2011) backup by @isayuksel
First, a new image for usb download the latest version of the Pli cihazımıza Official Site from installing: (1) Vu + Duo USB with the image install is
Needs to be done after the installation, after installation, settings:: (2) Vu + Duo first setup settings
Seçilidi HDMI.
1080i is selected.
Turkish language was chosen.
Can I search for channels or channel list at this point we can install ready. If you want to make a call before you need to do is channel tuner settings.
To search for detailed information about the channel: (4) Vu + Duo-channel search and bookmark create
We check our config for the network.
Menu> Setup> System> Network section of the "Network hardware settings," pointing to the kumandamızın "OK" button is pressed.
Under the section for the current settings to take note of the IP address. (Channel settings will need to install the editor not to enter the value of the rope.)
If the link I gave about the network setup problem can examine this topic: Vu + wired / wireless network settings and the test is
Now we can install Settingimizi Channel: 4 Channel List to take with a different method (book).
Twin VU + Duo & Solo & ET-9000 HDTV channel in the channel settings in the Setting loaded. @ Galaxy2002
Be sure to reboot after installing the device to the channel settings.
Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.
Tuner A: (simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
Tuner B: (advanced) DisegC 1.1: 42 ° / 13 / ° 7 ° / 19.2 ° / 23.5 ° / 39 ° / 9 ° / 4.8 ° / 16 °
Note: Notice that the first channel after you install the tuner ayarlamızı have made our list. Thus, due to the possible setting names of different satellites, the satellite broadcasts, we have prevented errors that can be taken.
Menu> Setup> System> Audio / Video settings section to come
4:3 content is as follows: Just Scale
> 16:9 content is as follows: Just Scale
changed. Green Key (OK) were recorded with the changes.
Time Zone: (GMT +02:00) Athens, Istanbul, Minsk
set as the startup service: Channel D
Menu => Add-ons section of the press to come Kumandamızın Green (Add-on Download) is pressed. Downloading plug-in information ... Please wait ... The system may display a message in the form of plugins into categories will be listed after their stay. When you press the OK button on your remote control by pointing to the categories of any plug-ins will be listed in that category.
Add-on manager;
Autoresolution systemplugins under the category,
fullbackup systemplugins under the category,
under systemplugins Setpasswd (The password is assigned),
softwareupdate systemplugins under (4.6)
videoenchancement systemplugins under the category,
apletrailer under category extensions,
bitrateviewer under category extensions,
cccaminfo under category extensions
mediacenter under category extensions,
MyTube under category extensions
permanentcloc under category extensions (not active)
pipzap under category extensions
simplerss under category extensions (supply address has been entered),
under category extensions Sherlock (help, press),
subtitleplayer under category extensions (3.05),
virtualzap under category extensions (arrow key, press and hold)
vlcplayer under category extensions
weatherplugin under category extensions
youtubeplayer under category extensions
established under softcams ccam 2.2.1.
When you want to set up as external plugins. Ipk file / files via ftp / tmp directory after a workout telnette give the following command:
Code:
opkg install / tmp / *. ipk
Restart your device after installation of the plugin.
enigma2-plugin-extensions-dreamexplorer_7.2_mipsel.ipk was downloaded.
WebMedia plugin was downloaded.
EPG Exporter plugin (7E -> 42E EPG solution for the final transfer!) ... Was the subject of using the EPG Exporter plugin (v3.0) @ exenonline
EPG was founded Turkish Character Correction plugin. (V3.0) @ exenonline
3.3 TS panel was established.
tunisiasat manager_3.0 download-addons-founded.
Menu => Accessories => tunisiasat manager_3.0 e-addons-come first livefootball (3.0 b), then the plugins tunisiasat "Netradioturk_2.6-b" and finally under the CCcam Info plugin was V1.3c
Hacksat-Keys-downloader-e2_1.1-30102010_mipsel.rar download and installation are doing.
To set up Hacksat telnette
Export MALLOC_CHECK_ = 0
opkg install-force-overwrite / tmp / Hacksat *
give the command.
Our device came after restarting the plugin by running the plug-ins are making k.ey update.
Note: After updating your device Hacksat k.ey with the switch turn on and off the back of the event error was corrected in the new version.
CCcam.cfg file / etc folder is located under. Server uses this knowledge to the file server need not to enter.
Note: Sometimes the startup state of inability to rope there. In this case, the menu> Setup> System> Network> Network and restart your network may require restart.
Pli Images Backup @isayuksel.usb
Pli Images Backup @isayuksel.nfi