• Olá Visitante, se gosta do forum e pretende contribuir com um donativo para auxiliar nos encargos financeiros inerentes ao alojamento desta plataforma, pode encontrar mais informações sobre os várias formas disponíveis para o fazer no seguinte tópico: leia mais... O seu contributo é importante! Obrigado.

EDG-Nemesis 2.4 Image for DM 800se svn (101r1)

jairobel

jairobel

GForum VIP
Entrou
Set 24, 2006
Mensagens
13,098
Gostos Recebidos
0
EDG-Nemesis 2.4 Image for DM 800se svn (101r1)
bootlogoe.jpg

Fixed EPG data loss at the transition between Enigma2 modes
Removed unused entry(Backup EPG, Save EPG) on Green Panel in Mode 1
Fix CrossEPG on Mode 1 (Enigma2 3.2) on dm7020hd
Add possibility to choice demux for CrossEPG

Blue->Yellow->EPG Configuration->CrossEPG demux
Small fix on default Skin
Código: 
http://www.multiupload.com/CZ6879E889



​
 
Fonsec@

Fonsec@

In Memoriam
Entrou
Set 22, 2006
Mensagens
29,306
Gostos Recebidos
6
Nemesis Release 101r1

Nemesis Release 101r1

All updates until 100r8 are included
Fixed EPG data loss at the transition between Enigma2 modes
Removed unused entry(Backup EPG, Save EPG) on Green Panel in Mode 1
Fix CrossEPG on Mode 1 (Enigma2 3.2) on dm7020hd
Add possibility to choice demux for CrossEPG
Blue->Yellow->EPG Configuration->CrossEPG demux


Small fix on default Skin
Up

Release 100r8 (Private Release)


All updates until 099r1 are included
Update radio.mvi screen logo
Add enable/disable deepstandby function on front power button long press
Blue->Yellow->Setup Console/RC/Enigma->Enable deepstandby on front power button long press


Add new choice "do nothing" on RC 'Action on long powerbutton press'
Add Unwanted Reboot Manager
Blue->Yellow->Setup Console/RC/Enigma->Go to standby after (unwanted) reboot


Update skin default
Replace HD-Glass-15 skin to old skin default
Fix HDD info on Device Status Panel
Update Plugin StayUP, Fix load epg on Mode 1
Fix Mode 2 on dm7020hd now enigma run in both mode 1 & 2
Load EPG in a cache without restart Enigma2 on E2 3.2.1 (Thank's Dr.Best)
No plugin epgloader need!!!! Plese do not install it!!!!
If you have epgloader plugin in your box, please remove it, before upgrade

Update Linux Kernel (Small fix)
Update bootlogo
Update dreambox-dvb-modules to 2011109 dm500hd, 800, 800se, 8000
Update dreambox-dvb-modules to 2011121 dm7020hd
Update Mode 1 enigma2 to 3.2.1
Partially rewrited Green Panel (Epg Control Center)
Fix crash on Mode 2 on System Info (Yellow and Blue Button)
Fix crash on Mode 2 using new setting created by Blindscan (I hope )
Fix loading kernel module for rt3070 based WIFI Adapter
Fix skin to support new Harddisk Manager
Update Italian translation
Update enigma2-plugins
After updating, and reboot, you do mount HDD with new Harddisk Manager!

Menu->Setup->System->Harddisk
Up

Release 099r1


All updates until 098r6 are included
Update bootlogo
Fix crash on Timer function
Update LED Manager plugin to 0.2
Re-add epgblacklist on Enigma Experimental (Mode 2)
Update enigma2-plugins
Up

Release 098r6


All updates until 095r6 are included
Move to 2.4 version
Changed bootlogo
Update dm7020hd dreambox-dvb-modules (20111102)
Add LED Manager plugin
Add full new Enigma 3.2 features (Only Using Mode 1)
Update enigma2-plugins
Update CrossEPG (Now you do download Rytec Provider)
You can run this image in two mode:

Mode 1: Enigma2 3.2


Blindscan Support (Tuner: BCM4505, BCM4506, Alps BSBE1 C01A/D01A)
Limited CrossEPG patch
No LCN Scanner patch
No Full USB-DTT features
Full Enigma2 3.2 features
Known bugs on 3.2 with USB-DTT Pen inserted

Problem with crypted channels
Problem to play recorded movie
Mode 2: Enigma2 Experimental

Mode 2 not work on dm7020hd, if you have a second Tuner DVB-C/T installed!
Fixed on release 101r1


No Blindscan Support
Full CrossEPG patch
LCN Scanner patch
More Enigma2 binary patch
Full USB-DTT features
After flashing, the image start in Mode 1: Enigma2 3.2
If you want change Mode, you can choose enigma2 to run via Blue Panel:


Blue->Yellow->Configure Console/RC/Enigma->Select Enigma Version
Restart Enigma2
Up

Release 095r6 (Latest 2.3 Version)


Update to InitramFS 1.8, for all Machines (thanks @gutemine)
Fix some italian translation
Update Lithuanian Language (Thanks @adga)
Update sqlite to 3.6.23.1 (dm7020hd)
Update CCID to 1.4.5
Update CrossEPG
Update CrossEPG (mpepg.conf) for Mediaset (Thanks @pappa)
Add MerlinEPGCenter plugin on Extension
Add New RC config (Enigma Key Green Swap) Green Key Press = subchannel
Green Key Press >1s = EPG Manager
Blu->Yellow->Setup Console/RC to choice RC Map.

Update enigma2
Update enigma2-plugins
Up

Update to new release Instruction

This Update work only if you have a Nemesis svn >= 098r6!!!!

If you have a SVN version < 092, or SSL < 84, follow this:

Flash SecondStage Loader 84-r0 (nfi version)
Reboot
Flash Image SVN 101r1
Reboot
If you have a SVN version >= 092, or SSL = 84

You can directly flash a new 101r1


Nemesis2.4-dm800se-e2-OE(1.6)-SVN(101r1).zip ​
 
Fonsec@

Fonsec@

In Memoriam
Entrou
Set 22, 2006
Mensagens
29,306
Gostos Recebidos
6
NEMESIS 2.4 101r1 Dual Enigma on-line, next 102r4

NEMESIS 2.4 101r1 Dual Enigma on-line, next 102r4

Attention for all users, please read change-log 100r8, 101r1 and here before updating!!!


Next Release 102r4
Updated 05.01.2012-11:30

All updates until 101r1 are included
Update Kernel (add EFI/GPT partition recognition support, enable large block device support)
Update PCSC-Lite to 1.8.1
Update gst-plugin-good (raise dts, ac3 and aac parse elements' ranks)
Update libpagecache (fix occasional program aborts/crashes (e.g. on e2 recording stop))
Downgrade plugin bitrateviewer, now work in both mode 1 and 2
Update to Webinterface 1.7.1
Change Green Button text "Initialize" to "Manage" on HDD Manager Screen
Fix Automatic download on StayUp plugin
Fix crash on HDD Manager
Fix crash on EPG Info Screen when plugin EasyInfo is installed
Fix some Italian translation
Update enigma2-plugins​
 
Fonsec@

Fonsec@

In Memoriam
Entrou
Set 22, 2006
Mensagens
29,306
Gostos Recebidos
6
Next Release 102r5



Updated 25.01.2012-11:30


All updates until 101r1 are included
Update to InitramFS 2.2, for all Machines (thanks @gutemine)
Update Kernel (add EFI/GPT partition recognition support, enable large block device support)
Update PCSC-Lite to 1.8.2
Update gst-plugin-good (raise dts, ac3 and aac parse elements' ranks)
Update libpagecache (fix occasional program aborts/crashes (e.g. on e2 recording stop))
Downgrade plugin bitrateviewer, now work in both mode 1 and 2
Update to Webinterface 1.7.1
Change Green Button text "Initialize" to "Manage" on HDD Manager Screen
Fix Automatic download on StayUp plugin
Fix crash on HDD Manager
Fix crash on EPG Info Screen when plugin EasyInfo is installed
Fix some Italian translation
Update enigma2-plugins
 
Fonsec@

Fonsec@

In Memoriam
Entrou
Set 22, 2006
Mensagens
29,306
Gostos Recebidos
6
Next Release 102r6
Updated 26.01.2012-09:15
WARNING: This update overwrite your OpenVPN config!!
Please save your configs before Update.

•All updates until 101r1 are included
•Update to InitramFS 2.2, for all Machines (thanks @gutemine)
•Update Kernel (add EFI/GPT partition recognition support, enable large block device support)
•Update PCSC-Lite to 1.8.2
•Update gst-plugin-good (raise dts, ac3 and aac parse elements' ranks)
•Update libpagecache (fix occasional program aborts/crashes (e.g. on e2 recording stop))
•Downgrade plugin bitrateviewer, now work in both mode 1 and 2
•Update to Webinterface 1.7.1
•Change Green Button text "Initialize" to "Manage" on HDD Manager Screen
•Fix Automatic download on StayUp plugin
•Fix crash on HDD Manager
•Fix crash on EPG Info Screen when plugin EasyInfo is installed
•Fix some Italian translation
•Update enigma2-plugins
 
Fonsec@

Fonsec@

In Memoriam
Entrou
Set 22, 2006
Mensagens
29,306
Gostos Recebidos
6
Next Release 102r6

​


Updated 30.01.2012-15:00


WARNING: This update overwrite your OpenVPN config!!
Please save your configs before Update.


All updates until 101r1 are included
Add skin Preview on Addons Panel
Update CrossEPG
Update to InitramFS 2.2, for all Machines (thanks @gutemine)
Update Kernel (add EFI/GPT partition recognition support, enable large block device support)
Update PCSC-Lite to 1.8.2
Update gst-plugin-good (raise dts, ac3 and aac parse elements' ranks)
Update libpagecache (fix occasional program aborts/crashes (e.g. on e2 recording stop))
Downgrade plugin bitrateviewer, now work in both mode 1 and 2
Update to Webinterface 1.7.1
Change Green Button text "Initialize" to "Manage" on HDD Manager Screen
Fix Automatic download on StayUp plugin
Fix crash on HDD Manager
Fix crash on EPG Info Screen when plugin EasyInfo is installed
Fix some Italian translation
Update enigma2-plugins


​
 
Fonsec@

Fonsec@

In Memoriam
Entrou
Set 22, 2006
Mensagens
29,306
Gostos Recebidos
6
Next Release 103r0

Updated 01.02.2012-11:00

WARNING: This update overwrite your OpenVPN config!!
Please save your configs before Update.


All updates until 102r8 are included
Code optimization on Blue Panel
Update enigma2-plugins
Up


Release 102r8 (Private Release)


All updates until 101r1 are included
Update bootlogo
Add skin Preview on Addons Panel
Update CrossEPG
Update to InitramFS 2.2, for all Machines (thanks @gutemine)
Update Kernel (add EFI/GPT partition recognition support, enable large block device support)
Update PCSC-Lite to 1.8.2
Update gst-plugin-good (raise dts, ac3 and aac parse elements' ranks)
Update libpagecache (fix occasional program aborts/crashes (e.g. on e2 recording stop))
Downgrade plugin bitrateviewer, now work in both mode 1 and 2
Update to Webinterface 1.7.1
Change Green Button text "Initialize" to "Manage" on HDD Manager Screen
Fix Automatic download on StayUp plugin
Fix crash on HDD Manager
Fix crash on EPG Info Screen when plugin EasyInfo is installed
Fix some Italian translation
Update enigma2-plugins​
 
Fonsec@

Fonsec@

In Memoriam
Entrou
Set 22, 2006
Mensagens
29,306
Gostos Recebidos
6
Next Release 103r0

​

Updated 02.02.2012-13:00
WARNING: This update overwrite your OpenVPN config!!
Please save your configs before Update.


All updates until 102r8 are included
Replaced the old default skin, with the new eXcort (thanks @mmark)
Code optimization on Blue Panel
Move to 2.5 version
Update enigma2-plugins
​



​





 
Fonsec@

Fonsec@

In Memoriam
Entrou
Set 22, 2006
Mensagens
29,306
Gostos Recebidos
6
Next Release 103r2
Updated 03.02.2012-14:00
WARNING: This update overwrite your OpenVPN config!!
Please save your configs before Update.
•All updates until 102r8 are included
•Update dreambox-dvb-modules to 20120202 for all machines
•Update Bootlogo for version 2.5 (thanks @XPlanet)
•Replaced the old default skin, with the new eXcort luX (thanks @mmark & Stardust)
•Code optimization on Blue Panel
•Move to 2.5 version
•Update enigma2-plugins
 
Fonsec@

Fonsec@

In Memoriam
Entrou
Set 22, 2006
Mensagens
29,306
Gostos Recebidos
6
Next step 105r3
​



Updated 18.02.2012-18:20

All updates until 104r4 are included
All updates until 103r5 are included
All updates until 102r8 are included
Added full german locale translation (thanks @bigstar2005)
Added time syncronization via Internet at dreambox boot (OpenVPN improvement)
Update dreambox-dvb-modules to 20120216 for all machines
Update to InitramFS 2.5 for all machines (thanks @gutemine)
Update dreambox-secondstage to 86r0 for dm7020hd
Fix crash on manual scan on mode 2
Fix enable swap file on reboot
Fix load EPG from backup on reboot
Fix hang on addons panel on dm800
Add preview for Picon
Small fix on Addons Panel
Update enigma2-plugins​
 
Fonsec@

Fonsec@

In Memoriam
Entrou
Set 22, 2006
Mensagens
29,306
Gostos Recebidos
6
Nemesis 2.5 106r2 next step
Updated 03.03.2012-22:00

​
​


  • [*=center]All updates until 105r4 are included
    [*=center]Added Autodiscover Picon Discover on: Flash, USB/CF/HDD/eSATA devices and Network Mountpoint
    [*=center]Added Autodiscover swap file Discover on: USB/CF/HDD/eSATA devices
    [*=center]Added Autodiscover epg.dat file Discover on: Flash, USB/CF/HDD/eSATA devices and Network Mountpoint
    [*=center]Added device selection for Picon installation You can install Picon on: Flash, USB/CF/HDD/eSATA devices and Network Mountpoint
    [*=center]Removed Picon Provider, System e Satellite from image
    Now you can install it from Blu Panel->Addons
    [*=center]Updated italian CVS translation using german locale as reference (Thank's @blu8)
    [*=center]Updated Nemesis Panel italian translation(Thank's @blu8)
    [*=center]Updated enigma2-plugins

​
 
Fonsec@

Fonsec@

In Memoriam
Entrou
Set 22, 2006
Mensagens
29,306
Gostos Recebidos
6
New Nemesis 2.6 106r8 next step
Updated 16.03.2012-11:00



  • All updates until 105r4 are included
  • Move to 2.6 version
  • Added possibility to disable HDD as a device for epg.dat, swap files and skins
  • Added possibility to remove HDD on Picon search path
  • Update CrossEPG to use new Autodiscover EPG (Only for Nemesis Images)
  • Update Enigma2 to 3.2.2 (20120309)
  • Update Bootlogo for version 2.6 (thanks @XPlanet)
  • Replaced the eXcort Lux default skin, with the new Nemesis Black Skin by mmark (thanks @mmark & Stardust)
  • Added possibility to enable/disable Pig Widget on Skin Blue->Yellow->Setup InfoBar OSD->Enable Pig Widget on skin
  • Added developer mode for skinner (Thank's @skaman)
  • Added Suppprt for Skins on external device Now you can install skin on, USB/CF/HDD/eSATA devices
    (At the moment 0nly skins without Python code modification)
  • Added Autodiscover Picon Discover on: Flash, USB/CF/HDD/eSATA devices and Network Mountpoint
  • Added Autodiscover swap file Discover on: USB/CF/HDD/eSATA devices
  • Added Autodiscover epg.dat file Discover on: Flash, USB/CF/HDD/eSATA devices and Network Mountpoint
  • Added device selection for Picon installation You can install Picon on: Flash, USB/CF/HDD/eSATA devices and Network Mountpoint
  • Removed Picon Provider, System e Satellite from image
    Now you can install it from Blue Panel->Addons
  • Updated italian CVS translation using german locale as reference (Thank's @blu8)
  • Updated Nemesis Panel italian translation(Thank's @blu8)
  • Updated enigma2-plugins
 
Fonsec@

Fonsec@

In Memoriam
Entrou
Set 22, 2006
Mensagens
29,306
Gostos Recebidos
6
NEMESIS 2.5 105r4 Dual Enigma on-line, next step 107r0

New Nemesis 2.6 107r0 next step
Updated 22.03.2012-11:00

•All updates until 105r4 are included
•Update dreambox-dvb-modules to 20120322 for 500hd, 800se, 7020hd and 8000
•Update Enigma2 to 3.2.2 (20120321)
•Move to 2.6 version
•Added possibility to disable HDD as a device for epg.dat, swap files and skins
•Added possibility to remove HDD on Picon search path
•Update CrossEPG to use new Autodiscover EPG (Only for Nemesis Images)
•Update Bootlogo for version 2.6 (thanks @XPlanet)
•Replaced the eXcort Lux default skin, with the new Nemesis Black Skin by mmark (thanks @mmark & Stardust)
•Added possibility to enable/disable Pig Widget on SkinBlue->Yellow->Setup InfoBar OSD->Enable Pig Widget on skin
•Added developer mode for skinner (Thank's @skaman)
•Added Suppprt for Skins on external deviceNow you can install skin on, USB/CF/HDD/eSATA devices
(At the moment 0nly skins without Python code modification)
•Added Autodiscover Picon
Discover on: Flash, USB/CF/HDD/eSATA devices and Network Mountpoint
•Added Autodiscover swap file
Discover on: USB/CF/HDD/eSATA devices
•Added Autodiscover epg.dat file
Discover on: Flash, USB/CF/HDD/eSATA devices and Network Mountpoint
•Added device selection for Picon installation
You can install Picon on: Flash, USB/CF/HDD/eSATA devices and Network Mountpoint
•Removed Picon Provider, System e Satellite from image
Now you can install it from Blue Panel->Addons
•Updated italian CVS translation using german locale as reference (Thank's @blu8)
•Updated Nemesis Panel italian translation(Thank's @blu8)
•Updated enigma2-plugins

 
Fonsec@

Fonsec@

In Memoriam
Entrou
Set 22, 2006
Mensagens
29,306
Gostos Recebidos
6
NEMESIS 2.6 107r2 Dual Enigma coming soon!
​



​
New Nemesis 2.6 107r2
Updated 27.03.2012-13:00
​


•All updates until 105r4 are included
•Rewrite device info panel, now are also displayed the network devices
•Update dreambox-dvb-modules to 20120322 for 500hd, 800se, 7020hd and 8000
•Update Enigma2 to 3.2.2 (20120321)
•Move to 2.6 version
•Added possibility to disable HDD as a device for epg.dat, swap files and skins
•Added possibility to remove HDD on Picon search path
•Update CrossEPG to use new Autodiscover EPG (Only for Nemesis Images)
•Update Bootlogo for version 2.6 (thanks @XPlanet)
•Replaced the eXcort Lux default skin, with the new Nemesis Black Skin by mmark (thanks @mmark & Stardust)
•Added possibility to enable/disable Pig Widget on Skin
Blue->Yellow->Setup InfoBar OSD->Enable Pig Widget on skin
•Added developer mode for skinner (Thank's @skaman)
•Added Suppprt for Skins on external device
Now you can install skin on, USB/CF/HDD/eSATA devices
(At the moment 0nly skins without Python code modification)
•Added Autodiscover Picon
Discover on: Flash, USB/CF/HDD/eSATA devices and Network Mountpoint
•Added Autodiscover swap file
Discover on: USB/CF/HDD/eSATA devices
•Added Autodiscover epg.dat file
Discover on: Flash, USB/CF/HDD/eSATA devices and Network Mountpoint
•Added device selection for Picon installation
You can install Picon on: Flash, USB/CF/HDD/eSATA devices and Network Mountpoint
•Removed Picon Provider, System e Satellite from image
Now you can install it from Blue Panel->Addons
•Updated italian CVS translation using german locale as reference (Thank's @blu8)
•Updated Nemesis Panel italian translation(Thank's @blu8)
•Updated full german locale translation (thanks @bigstar2005)
•Updated enigma2-plugins
​
 
Fonsec@

Fonsec@

In Memoriam
Entrou
Set 22, 2006
Mensagens
29,306
Gostos Recebidos
6
Nemesis 2.6 107r5

Attention read carrefully!
to do before upgrade to 107r5!!!!

  • Remove all Skins installed from Addons and reboot with de default skin
    the old skins are no more compliant with the 107r5
  • proceed with the upgrade on-line
Nemesis 2.6 107r5
Updated 29.03.2012-13:00



  • All updates until 105r4 are included
  • Rewrite device info panel, now are also displayed the network devices
  • Update dreambox-dvb-modules to 20120328 fot 800se
  • Update dreambox-dvb-modules to 20120322 for 500hd, 7020hd and 8000
  • Update Enigma2 to 3.2.2 (20120327)
  • Move to 2.6 version
  • Added possibility to disable HDD as a device for epg.dat, swap files and skins
  • Added possibility to remove HDD on Picon search path
  • Update CrossEPG to use new Autodiscover EPG (Only for Nemesis Images)
  • Update Bootlogo for version 2.6 (thanks @XPlanet)
  • Replaced the eXcort Lux default skin, with the new Nemesis Black Skin by mmark (thanks @mmark & Stardust)
  • Added possibility to enable/disable Pig Widget on Skin Blue->Yellow->Setup Skin->Enable Pig Widget on skin
  • Added developer mode for skinner (Thank's @skaman)
  • Added Suppprt for Skins on external device Now you can install skin on, USB/CF/HDD/eSATA devices
    (At the moment 0nly skins without Python code modification)
  • Added Autodiscover Picon Discover on: Flash, USB/CF/HDD/eSATA devices and Network Mountpoint
  • Added Autodiscover swap file Discover on: USB/CF/HDD/eSATA devices
  • Added Autodiscover epg.dat file Discover on: Flash, USB/CF/HDD/eSATA devices and Network Mountpoint
  • Added device selection for Picon installation You can install Picon on: Flash, USB/CF/HDD/eSATA devices and Network Mountpoint
  • Removed Picon Provider, System e Satellite from image
    Now you can install it from Blue Panel->Addons
  • Updated italian CVS translation using german locale as reference (Thank's @blu8)
  • Updated Nemesis Panel italian translation(Thank's @blu8)
  • Updated full german locale translation (thanks @bigstar2005)
  • Updated enigma2-plugins
 
Deves fazer login ou registrar-te para postar aqui.
Topo