Ajuda qual é o oscam que le a carta da nos nu raspi?

Ola eu nao encontro qual é a versão du oscam que le a carta nos algen pode me ajudar obrigado

obrigado pela resposta mas eu tenho un problema estranho :
secalhar podes me ajudar

para testar meti uma carta TNT Sat se fasso erro nao estrago a Nos

tenho para ler a carta : Smartreader2 plus

[reader]
label = CarteTNT
protocol = smargo
device = /dev/ttyUSB0
smargopatch = 1
autospeed = 0
caid = 0500
detect = cd
ident = 0500:030B00
aeskeys = 0500@030B00:0,F*****
group = 1
lb_weight = 1000
audisabled = 1

*****************************************
dame o ATR mas mais nada :

2014/08/08 19:17:17 0 s waiting for local card init
2014/08/08 19:17:17 1AE3CF8 r CarteTNT [smargo] smargo init type is smargo
2014/08/08 19:17:17 1AE5B28 h webif: decompressed 145920 bytes back into 358716 bytes
2014/08/08 19:17:17 1AE5B28 h HTTP Server running. ip=0.0.0.0 port=5000
2014/08/08 19:17:17 1AE3CF8 r CarteTNT [smargo] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=369, cardmhz=369)
2014/08/08 19:17:18 1AE3CF8 r CarteTNT [smargo] card detected
2014/08/08 19:17:22 1AE3CF8 r CarteTNT [smargo] ATR: 3F 77 18 00 00 C2 EB 41 02 6C 90 00
2014/08/08 19:17:22 1AE3CF8 r CarteTNT [smargo] Warning: D=0 is invalid, forcing D=1
2014/08/08 19:17:22 1AE3CF8 r CarteTNT [smargo] Init card protocol T0, FI=1, F=372, D=1, N=0
2014/08/08 19:17:22 1AE3CF8 r CarteTNT [smargo] Calculated work ETU is 100.81 us reader mhz = 369
2014/08/08 19:17:23 1AE3CF8 r CarteTNT [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.69 MHz (specified in reader->mhz)
2014/08/08 19:17:24 1AE3CF8 r CarteTNT [smargo] card system not supported
2014/08/08 19:17:24 1AE3CF8 r CarteTNT [smargo] Normal mode failed, reverting to Deprecated Mode
2014/08/09 12:52:59 1AE3CF8 r CarteTNT [smargo] ATR: 3F 77 18 00 00 C2 EB 41 02 6C 90 00
2014/08/09 12:52:59 1AE3CF8 r CarteTNT [smargo] Warning: D=0 is invalid, forcing D=1
2014/08/09 12:52:59 1AE3CF8 r CarteTNT [smargo] Init card protocol T0, FI=1, F=372, D=1, N=0
2014/08/09 12:52:59 1AE3CF8 r CarteTNT [smargo] Calculated work ETU is 100.81 us reader mhz = 369
2014/08/09 12:52:59 1AE3CF8 r CarteTNT [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.69 MHz (specified in reader->mhz)
2014/08/09 12:53:00 1AE3CF8 r CarteTNT [smargo] card system not supported
2014/08/09 12:53:00 1AE3CF8 r CarteTNT [smargo] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/08/09 12:53:00 1AE3CF8 r CarteTNT [smargo] card initializing error
2014/08/09 12:53:00 0 s init for all local cards done
2014/08/09 12:53:00 0 s anti cascading disabled

Sabes o que se esta a passar?
não do com isto Obrigado

sim as Ymod!!!! para ja

Fonsec@ disse:

Segundo li o cartão TNT só é lido por versões alteradas do oscam.

Se estiver enganado que me corrijam.

Clique para expandir...

Só se mudou muito recentemente. Porque o oscam tbm já lia

eu acho que é un problema com o leitor externo de cartas mas o que sera nao sei Obrigado pela ajuda