Step 4: Making the walkman work.
This process can take a while! If you don't have much time, do not do this now!
Download SEtool2 Lite 1.11 (Download) and extract it somewhere.
Now, go into the SEtool2 Lite folder then into the qamaker folder, and drag your MAIN file onto the qamaker.exe icon, a 'Quick Access Patch' will be made.
~ The Quick Access Patch is required to patch DB2020 CID52 phones ~
Now start SEtool2 Lite, select W660 as the phone type and then click 'Read GDFS'.
It will make a copy of your GDFS, like XS++ did, and DO NOT disconnect the phone or press Stop until SEtool says "Elapsed: xx secs."
Disconnect the USB cable, remove the battery then reinsert it.
Make sure W660 is selected as Phone Type, tick 'Bypass DB2020 security'.
In the files box, click 'Add' and add the MAIN file.
Then in the MISC files box, add the Quick Access patch you generated not long ago.
Your SEtool2 LITE window should look a bit like this:
If it does, click FLASH.
It will then ask you to connect your phone, so connect it, and it will begin.
During the process, it may ask you to unplug the phone, remove then reinsert the battery, click READY then connect the phone.
So don't leave the computer or minimise the window!
During the process, it may look like the program has stopped/crashed/finished but it hasn't!
DO NOT DISCONNECT THE PHONE!
Only disconnect when SEtool2 LITE says "Elapsed: xx secs."
This process may take about 30 mins!
Once done, SEtool2 LITE will say "Elapsed: xx secs." (Or "Elapsed: xxxxxx secs." )
Unplug the phone, remove the battery then reinsert it.
-That's the long bit over-
Download W660_R8BB001_Patches.zip (Pass: solidsnake204) and extract the illumination patch.
Now in SEtool2 Lite, make sure W660 is selected as Phone type, uncheck 'Bypass DB2020 security', and check 'Use "quick access" patch', (if it hasn't already) remove the MAIN from the files box, and in the MISC files box, browse to the Illumination Patch you just extracted.
Your SEtool Lite window should look a bit like this:
If it does, then click WRITE SCRIPT.
Take care NOT to press WRITE GDFS as that will damage your phone!
It will now patch your phone, now a lot quicker because you just applied the quick access patch.
Once SEtool2 Lite has finished (when it says "Elapsed: xx secs.") disconnect your phone, remove the battery then reinsert, then turn it on.
Don't just automatically go to the walkman as it will crash, because you need to set the brightness to 50% or 60%.
Once you've set the brightness, walkman will work. Enjoy!