Jmorrison
GForum VIP
- Entrou
- Set 22, 2006
- Mensagens
- 5,611
- Gostos Recebidos
- 0
Fausto v1.35 (16/01/2009)
Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM
FAUSTO KEYS EDITOR/EMULATOR/LOGGER/CLIENT
Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe
Fausto Emulator compatibilities:
*XML file to be compatible with Fausto Emulator MUST include cryptoworks Cardkey (06)
This keys used in internal by diablo cam emu
If the CardKey (06) not include you'll can't decode cryptoworks with Fausto Emulator
CardKey (06) added on Keys.bin has no effect under diablo cam emulator
*Include Betacrypt Tuneled Nagra 2 Providers
*Include ECM IV & ECM Seed keys under Irdeto2 Coding System
CS Client protocol supported:
Newcamd (TCP) tested with NewCS 1.60 & MPCS-0.9d card server
RadeGast (TCP) tested with NewCS 1.60 & MPCS-0.9d card server
Camd35 (UDP cs357x) tested with camd3 v3.865 & MPCS-0.9d card server
Camd35 (TCP cs378x) tested with camd3 v3.865 & MPCS-0.9d card server
Camd33 (TCP) tested with MPCS-0.9d card server
Default LocalHost servers loaded auto
Server type auto detected
ECM Cache:
ONLY avalaible for diablo Wireless, cause several cams cam be connected under FE at same time
Apply under emulator/cards support/cards sharing
Give possibilities to make home sharing with emulator/cards support/cards sharing
How to synchronize wireless cams
1.Insert one cam
2.Run emulator
3.Optionally connect to server or to official card
4.After first ecm decoding (cf blue datas on tab MONITOR) insert second cam
First ecm from cam 1 will be decoded by server or card progger, same ecm from cam 2 will use ecm cache
Version 1.35 (16/01/2009)
- Emulator
*Monitor: emulator can be started without loading keys file
*Tracker: datas log modified
*Added ECMs Cache for diablo wireless: To activate cache tick case "ECM CACHE" on tab WIRELESS
*Card Client (cs):
>>>>added camd33 support
>>>>added camd35 support (cs357x & cs378x), server Description must include UPD or TCP word
example:
Camd35 Local Server (TCP) = TCP connection
Camd35 Local Server (UDP) = UDP connection
>>>>Added Tab IDENT:
define CAID & Provider(s) supported by card (can be apply for Newcamd/Camd3X/Radegast)
Details on file Fausto & Card Client.txt (Fausto folder)
*NEW TAB SERIAL Added:
Connection to Receiver Serial port using SSSP (=Simple Serial Sharing Protocol)
(Tested Clarke Tech 5000 HD & Goldvision patched ALI firmware)
Connection to Receiver Serial port using HSIC (=Humax Sharing Interface Client)
(Tested under Humax 5400 (patched with TOH - HOT firmware) & HSIC: Need to have card+S+emu in box config and emm block on)
Report to file Fausto & Receiver Serial How To.txt for more details (Fausto folder)
-Extra:
*Language files: New datas added ready for translation
Special Thanks to:
JKF Intersat Forum for all support give to our tools.
All guys for language files & translation:
MagicTrance, superseeder, sYgNaL, mcolaciuri, Seti72, Alaancee, Jogo1967, GarField57, Claudio_LDN, S62, Professor Moriarty, Twister, s62, Stauffie, Anunaki.
Enjoy.
Fausto
(C)MASARE Team-Saoud007
(C)FullDump TM
FAUSTO KEYS EDITOR/EMULATOR/LOGGER/CLIENT
Installation: not needed to uninstall previous version, just run Fausto V1.XX setup.exe
Fausto Emulator compatibilities:
*XML file to be compatible with Fausto Emulator MUST include cryptoworks Cardkey (06)
This keys used in internal by diablo cam emu
If the CardKey (06) not include you'll can't decode cryptoworks with Fausto Emulator
CardKey (06) added on Keys.bin has no effect under diablo cam emulator
*Include Betacrypt Tuneled Nagra 2 Providers
*Include ECM IV & ECM Seed keys under Irdeto2 Coding System
CS Client protocol supported:
Newcamd (TCP) tested with NewCS 1.60 & MPCS-0.9d card server
RadeGast (TCP) tested with NewCS 1.60 & MPCS-0.9d card server
Camd35 (UDP cs357x) tested with camd3 v3.865 & MPCS-0.9d card server
Camd35 (TCP cs378x) tested with camd3 v3.865 & MPCS-0.9d card server
Camd33 (TCP) tested with MPCS-0.9d card server
Default LocalHost servers loaded auto
Server type auto detected
ECM Cache:
ONLY avalaible for diablo Wireless, cause several cams cam be connected under FE at same time
Apply under emulator/cards support/cards sharing
Give possibilities to make home sharing with emulator/cards support/cards sharing
How to synchronize wireless cams
1.Insert one cam
2.Run emulator
3.Optionally connect to server or to official card
4.After first ecm decoding (cf blue datas on tab MONITOR) insert second cam
First ecm from cam 1 will be decoded by server or card progger, same ecm from cam 2 will use ecm cache
Version 1.35 (16/01/2009)
- Emulator
*Monitor: emulator can be started without loading keys file
*Tracker: datas log modified
*Added ECMs Cache for diablo wireless: To activate cache tick case "ECM CACHE" on tab WIRELESS
*Card Client (cs):
>>>>added camd33 support
>>>>added camd35 support (cs357x & cs378x), server Description must include UPD or TCP word
example:
Camd35 Local Server (TCP) = TCP connection
Camd35 Local Server (UDP) = UDP connection
>>>>Added Tab IDENT:
define CAID & Provider(s) supported by card (can be apply for Newcamd/Camd3X/Radegast)
Details on file Fausto & Card Client.txt (Fausto folder)
*NEW TAB SERIAL Added:
Connection to Receiver Serial port using SSSP (=Simple Serial Sharing Protocol)
(Tested Clarke Tech 5000 HD & Goldvision patched ALI firmware)
Connection to Receiver Serial port using HSIC (=Humax Sharing Interface Client)
(Tested under Humax 5400 (patched with TOH - HOT firmware) & HSIC: Need to have card+S+emu in box config and emm block on)
Report to file Fausto & Receiver Serial How To.txt for more details (Fausto folder)
-Extra:
*Language files: New datas added ready for translation
Special Thanks to:
JKF Intersat Forum for all support give to our tools.
All guys for language files & translation:
MagicTrance, superseeder, sYgNaL, mcolaciuri, Seti72, Alaancee, Jogo1967, GarField57, Claudio_LDN, S62, Professor Moriarty, Twister, s62, Stauffie, Anunaki.
Enjoy.