DM7020HD Fotografias

Autor Dream Elite



















Fotos do Boot

DM7020 HD especificações técnicas

Especificações técnicas da nova Dream 7020HD

Fotos internas.

Dreambox 7020HD Já saiu

Dreambox 7020HD

Preço ronda entre os 550€ e os 620€

Powerful receiver for digital TV and Radio programs.
Main features are a 400 MHz processor the dreambox DM 7020 HD supports the Linux TV API

MPEG-2 / H.264 decoding
10/100MBit compatible Ethernet Interface
DVB-S2 tuner
DVB-C / DVB-T hybrid tuner
mixable, plug & play
2 x Common Interface
big size white OLED display

Technical data

400 MHz MIPS Processor
Enigma 2, Linux Operating System
brilliant white OLED - Display
MPEG-2 /H.264 Hardware decoding
DVB-S2 and DVB-C / DVB-T tuner modul
2 x DVB Common-Interface Slot
2 x Smartcard-Reader (Dreamcrypt CA)
Mini USB for service update
10/100 MBit compatible Ethernet Interface
3 x USB 2.0 (1 x front, 2 x back)
S/PDIF Interface for digital bit stream out (AC-3)
Scart-interfaces
analog modem
HDMI
Audio/Video cinch out
1 GByte Flash, 512 MByte RAM
SATA
- Plug&Play frame for internal HDD 3,5" in any capacity
eSATA)
unlimited channel lists for TV/Radio
channel-change time < 1 second
automatic service scan
directly bouquet-lists
EPG (electronic program guide)
Videotext Decoder
multiple LNB-Switching control (DiSEqC)
OSD in many languages and skin-support


DreamBox DM7020 HD technical data

DVB-S2 Tuner:
Frequency Range 950...2150 MHz
QPSK Demodulation EN 302 307
Signal Level - 65 dBm...- 25 dBm
Signal-to-Noise Level 12 dB max.
DBS-Tuner Input Connector F-Type female
Input Impedance 75 Ohm
AFC +/- 3 MHz
Demodulation Shaped QPSK and 8PSK
FEC Viterbi and Reed-Solomon
Viterbirate 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9
Roll-off Factor 35 %

Hybrid - DVB-C/T-Tuner:
VHF-Kanäle: 2-12 (49...230 MHz)
UHF-Kanäle: 21-69 (470...861 MHz)
DVB-C HDTV kompatibel
Eingangsfrequenzbereich: 51...858 MHz
Symbolrate: 1 ... 7 Mbaud/s
Eingangsimpedanz: 75 Ohm
Tuner Ein/Ausgang: IEC-Stecker
DVB-C / DVB-T über Software umschaltbar

Common-Interface:
Common-Interface Power Consumption max. 0,3A/5V

Video decoder:
Video Compression MPEG-2 / H.264 and MPEG-1 compatible
Video Standard PAL G/ 25 Hz, NTSC
Video Formats 4:3 / 16:9
Letterbox for 4:3 TV-Device

Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

Output analog:
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB

Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical, coaxial (AC3)

Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard

TV-Scart:
Output: FBAS, RGB, S-Video

Mini USB service Interface:
Function: Update of Firmware

Ethernet:
10/100 MBit compatible interface
Function: Update of Firmware

USB:
USB 2.0 connector (3x)

SATA Interface:
for internal HDD
eSATA

LNB power and polarisation per tuner:
LNB Current 500mA max.; short-circuit-protected
LNB Voltage vertical < 14V no load, > 11,5V at 400mA
LNB Voltage horizontal < 20V no load, > 17,3V at 400mA
LNB power off in Standy mode

Count of active satellite position:
DiSEqC 1.0/1.1/1.2 and USALS (Rotor Control)

Power consumption:
< 15W (in operation, with LNB)
< 13W (in operation, no LNB)
< 1W (Deep-Standby-Mode)

Input voltage:
230V / 50 Hz alternating current +/- 15%
110V / 60 Hz alternating current +/- 15%
switchable

Physical specification:
Ambient Temperature +15°C...+35°C
Humidity < 80%
Size (W x D x H): 372 mm x 232 mm x 75 mm
Weight: 2,5 kg without HDD

iCVS-Image-dm7020HD from 17.10.2011

iCVS-Image-dm7020HD from 17.10.2011

Traduzir Estes Comentários

Version details:
Enigma2 from 17.10.2011
Plugins from 17.10.2011
Skins from 17.10.2011
Treiber from 28.09.2011 (DM7020HD)
Treiber from 02.09.2011 (DM500hd, DM800, DM800se, DM8000)
Treiber from 06.05.2011 (DM7025)
Secondstageloader 84 (DM500hd, DM800, DM800se, DM8000, 7020HD)
Secondstageloader 83 (DM7025)

Experimental / own update feed


Extras / included changes:
- Gemini plugin reade (GeminiWizard already included)
- switch ON/OFF EPG-Progress in %, adjoustable in the customization menu
- Set space between channelname and EPG info, adjoustable in the customization menu
- Picture-rotation if exif tag available, adjoustable in the customization menu
- dcccamd removed from the image
- sambaserver removed from the image
- own iCVS bootlogos by yvessun
- Support for Smargo usb Cardreader FTDI_SIO and PL203
- CrossEPG Release 179
- Spinner fix (bootlogo)
- Startvolume set down to 30%
- Expert mode as standard in the customization menu
- Adapted view in screen HelpMenuList
- GraphMultiEPG incl. Picons
- GraphMultiEPG colored
- Adapted view in screen PluginList
- iCVS adapted Keymapxml
- Adapted view in screen Pictureplayer
- Adapted view in screen Serviceinfo
- Adapted view in screen Movielist
- Adapted view in screen ClockToText
- Change of Yes/No in the startwizard at the child safety pin question
- MHW EPG activated
- Ready for Karatelight from @mamba0815 and LowFat from @gutemine
- DVD Burn removed from 8K image, can/should be installed over the feed.
- rt2570 and rt3070 WLAN
- IPv6 and CPU FREQ Kerneladaptions
- myChannelSelection by @adenin
- listbox_fix by @adenin
- on/off bouquet + button (direct access to the bouquet with +, selectable in menu -> customize

no Initramfs Kernel in this image


Further Informations:
There are no Cams, Cam Configs, Settings,... availabe on the feed.
This image can be used as a base for the Gemini plugin.

Although can be installed userscript, if you don't want to use the Gemini plugin.


Enigma2 Changelog:
>>> Changelog E2 <<<

• Download

Imagens e vídeo da nova DM7020 HD

Imagens e vídeo da nova DM7020 HD

Vídeo