1. #1
    Avatar de Fonsec@
    Registo
    Sep 2006
    Idade
    54
    Posts
    29.306

    Padrão DUO CARD -New Card

    Isto foi postado e confirmado por um Super Moderador de um fórum internacional de renome, após ser varias vezes questionado sobre a informação afirmou que era verdadeira e que em breve iria haver novidades garantiu que era 100% verdade.
    Parece que vai haver novidades para tv cabo e D+, vamos aguardar para ver se se confirma.


    Traduzir Estes Comentários

    HOW TO UPGRADE DUO CARD

    Update using a pendrive:

    1) rename the DuoAPPv18.duo file to duoAPP.duo
    2) copy the duoAPP.Duo file into a pendrive on root directory.
    3) insert the pendrive in the receiver
    4) on the receiver, select update DUO Card and wait

    your card is already updated!
    Update using a PC and a phoenix interface:

    1- copy the DUOAPPv18 and the DuoAppLoader files in your PC.
    2- Select the apropiate com port for you PHOENIX adapter.
    3- Select the apropiate firmware
    4- push "connect"
    HOW TO UPGRADE FIRMWARE

    To do the upgrade, turn off the STB and connect the STB to the PC using a null
    modem cable (2-3 3-2 5-5), then start the program in the PC, select the new
    firmware to load and start the upgrade procedure, then turn the STB on and the
    upgrade process will begin. Follow the screen instructions.


    EMU MODE


    When Emumodule is active, you can access to special menus

    - MENU - TOOLS - KEY EDITOR - to edit the keys that change periodically
    - INFO - INFO (two times INFO key) - to display information about emulation


    ------------------------------------------------------------------------------
    |********This information does not affect SRX series******** |
    ------------------------------------------------------------------------------

    By default, the module is deactivated, to activate it do the following
    process

    1.- Go to main menu (press menu in RCU)
    2.- Press 2 0 2 0 in the RCU
    3.- A popup message will appear CAS SYSTEM ENABLED
    4.- Emu module is now working

    To disable the module repeat the above procedure, the popup will change
    to 'CAS SYSTEM DISABLED'

    AUTOUPDATE CONTROL
    By default, autoupdate in D+ and TV Cabo is activated.
    to deacativate it, go to Main Menu (press menu key in your RCU), and press
    2121
    [CENTER][URL=http://img.gforum.tv/ver.php?i=3752ec82609f89ed15f0c374612efe0eee54b706.png][IMG]http://img.gforum.tv/img/3752ec82609f89ed15f0c374612efe0eee54b706.png[/IMG][/URL][/CENTER]

  2. #2
    Avatar de Fonsec@
    Registo
    Sep 2006
    Idade
    54
    Posts
    29.306
    Duo app v18

    Duo app loader
    Arquivos Anexos Arquivos Anexos
    [CENTER][URL=http://img.gforum.tv/ver.php?i=3752ec82609f89ed15f0c374612efe0eee54b706.png][IMG]http://img.gforum.tv/img/3752ec82609f89ed15f0c374612efe0eee54b706.png[/IMG][/URL][/CENTER]

  3. #3
    Avatar de Fonsec@
    Registo
    Sep 2006
    Idade
    54
    Posts
    29.306
    Mais alguma info sobre o cartão...




    Bouquets of entry of the card broken system NAGRA3


    Digital + Spain

    And tv cabo

    Then join the rest of the packages

    DIGITV ROMANIAN

    The Polish polsat

    Update method

    It seems that it would operate on many of the devices, but updated for ways PHOENIX programmed as follows:

    1 - Copy the two files and DUOAPPv18 DuoAppLoader to your device

    2 - Select your com port Palmbermjh PHOENIX

    3 - Select the attached file to update the card

    4 - Click on the connect would have been updated

    As for Starsat devices that support is still ongoing and noted mean: Theta, Mu, Nu, Iota

    Fathdat after the card is inserted in the device and raise the update by the UsB as follows:

    1 - rename the file to DuoAPPv18.duo duoAPP.duo

    2 - copy the file to the Usb duoAPP.Duo

    3 - Install to the device, the Usb

    4 - Select the device in this DUO Card is the property and has recently appeared in the devices listed

    Then wait for the card is updated

    Note:

    After doing these steps on the device recognizes the Theta is to update the card, but required to be included

    Apparently there is in store for the days of the team
    [CENTER][URL=http://img.gforum.tv/ver.php?i=3752ec82609f89ed15f0c374612efe0eee54b706.png][IMG]http://img.gforum.tv/img/3752ec82609f89ed15f0c374612efe0eee54b706.png[/IMG][/URL][/CENTER]

  4. #4
    Avatar de ruimoreira24
    Registo
    Sep 2006
    Idade
    38
    Posts
    2.225
    mais um card para encostar deve ser como tal o card enigma, o card parece ser o mesmo o que se muda e o OS

    5 - DREAMBOX 500S
    1 - DREAMBOX 800HD SE ORIGINAL
    1 - DREAMBOX 800HD SE 2.10 - WD 250G + ASUS WIFI WL-167G
    3 - DREAMBOX 800HD PVR FERRARI + ASUS WIFI WL-167G
    1 - DREAMBOX 800HD PVR 2.01
    1 - VU+ DUO2 E2 + WD2TB
    1 - VU+ SOLO SE
    1 - ZGEMMA-STAR LC CABO
    1 - OCTAGON SF4008 E2 4K + WD500G
    1 - AMIKO ONE ANDROID TV

  5. #5
    Avatar de Fritz
    Registo
    Oct 2006
    Posts
    314
    mais uma pra fazer de porta chaves no futuro

  6. #6
    Avatar de Fonsec@
    Registo
    Sep 2006
    Idade
    54
    Posts
    29.306
    Como se previa:

    DUO CARD:
    We only support the update of the DUO card, the DUO card is not moresat card in anyway.

    The packages open in the DUO ard are Csat, some Orange and TNT.

    It has been stated that the DUO card opens the Digital+ package but this is NOT so.
    [CENTER][URL=http://img.gforum.tv/ver.php?i=3752ec82609f89ed15f0c374612efe0eee54b706.png][IMG]http://img.gforum.tv/img/3752ec82609f89ed15f0c374612efe0eee54b706.png[/IMG][/URL][/CENTER]

Tópicos Similares

  1. net card v5
    Por marote_5 no fórum NetCard
    Respostas: 3
    Último Post: 28-02-2013, 10:20
  2. net card v5
    Por amaro111 no fórum Manuais & Tools
    Respostas: 7
    Último Post: 04-04-2011, 22:12
  3. Duvidas e Questões Gerais Cerebro Card, Didem & Zebra Card , K3 & K4
    Por Pato Bravo no fórum Dúvidas e Questões Gerais
    Respostas: 0
    Último Post: 20-05-2007, 13:32
  4. fan card
    Por benfica s no fórum Dúvidas e Questões Gerais
    Respostas: 4
    Último Post: 15-04-2007, 12:13

Permissões de Postagem

  • Você não pode iniciar novos tópicos
  • Você não pode enviar respostas
  • Você não pode enviar anexos
  • Você não pode editar suas mensagens
  •  

Conectar

Conectar