jairobel
GForum VIP
- Entrou
- Set 24, 2006
- Mensagens
- 13,098
- Gostos Recebidos
- 0
Emergancy Flash Via Usb !!! 1.7.3
if needed please do as following :
1. extract both files to usb root, so direct, not in a subfolder (USB need to be in FAT32 )
2. insert USB STICK into box, power off, power on
3. wait for messages on VFD SCREEN, LOAD, E001 - E100, P001-P100
4. when done, you get message " DONE "
5. take usb out !!!!!!!!!!!
6. REBOOT, AGAIN
DO NOT POWER OFF WHEN LOAD STARTS !!!!!!!!!!!!!!!!!!, JUST WAIT 10-15 min and its done
if needed please do as following :
1. extract both files to usb root, so direct, not in a subfolder (USB need to be in FAT32 )
2. insert USB STICK into box, power off, power on
3. wait for messages on VFD SCREEN, LOAD, E001 - E100, P001-P100
4. when done, you get message " DONE "
5. take usb out !!!!!!!!!!!
6. REBOOT, AGAIN
DO NOT POWER OFF WHEN LOAD STARTS !!!!!!!!!!!!!!!!!!, JUST WAIT 10-15 min and its done
Código:
[I]If we do changes in kernel, or CFE then we will do a upgrade like this, but for now this is only a emergancy mesure not more, and i wanted users
to have in the case they need it quickly !!!!!!! [/I]
Código:
http://www.sendspace.com/file/nox011