satjoca
GF Prata
- Entrou
- Set 25, 2006
- Mensagens
- 199
- Gostos Recebidos
- 1
Updated Openbox All-in-One Clone Safe For_ s9_s10_s11_s12
Openbox update (updated a lot of channels Updated openbox s9..s10..s11.. s12.. all-in-one file 8-1-13
(this is the ''anonymousx'' clone safe file that i edited with channel names and in order...Thanks to him)
This is complete .abs file with channel list i made with newer firmware...... Satellite is set using a diseqc switch with 119 satellite set to port 1 and 110 satellite on port 2 ( you may have to adjust your satellite settings to match your system ) you must put your own p$ info in to get a picture)
Follow these steps:
Download this file to desktop and then unzip it and send the (.abs file)to your usb pen drive
Then take from computer and insert in your openbox
Now go to menu > tools > upgrade by usb > top line is upgrade mode ( set this to ''image file(.abs)" )
now one click down to upgrade file and right click to find this file ( .abs )
Then one click down to "start" (ok) and let it download and when it asks "are you sure to burn" click "yes" and let it finish and reboot.
NOTE:
If you get scrolling picture when you downloaded just hit the v-format button on your remote until the picture straightens out and go to:
Menu > system setup > down to ''video out'' and set that on ''rgb'' Exit out to picture
This file is the latest upgrade with channel list included and will work fine on S9, S10, S11 and S12 openbox receivers.
Ver anexo Openbox s9-s10-s11-s12_Update_8-1-13.rar
Openbox update (updated a lot of channels Updated openbox s9..s10..s11.. s12.. all-in-one file 8-1-13
(this is the ''anonymousx'' clone safe file that i edited with channel names and in order...Thanks to him)
This is complete .abs file with channel list i made with newer firmware...... Satellite is set using a diseqc switch with 119 satellite set to port 1 and 110 satellite on port 2 ( you may have to adjust your satellite settings to match your system ) you must put your own p$ info in to get a picture)
Follow these steps:
Download this file to desktop and then unzip it and send the (.abs file)to your usb pen drive
Then take from computer and insert in your openbox
Now go to menu > tools > upgrade by usb > top line is upgrade mode ( set this to ''image file(.abs)" )
now one click down to upgrade file and right click to find this file ( .abs )
Then one click down to "start" (ok) and let it download and when it asks "are you sure to burn" click "yes" and let it finish and reboot.
NOTE:
If you get scrolling picture when you downloaded just hit the v-format button on your remote until the picture straightens out and go to:
Menu > system setup > down to ''video out'' and set that on ''rgb'' Exit out to picture
This file is the latest upgrade with channel list included and will work fine on S9, S10, S11 and S12 openbox receivers.
Ver anexo Openbox s9-s10-s11-s12_Update_8-1-13.rar
