• Olá Visitante, se gosta do forum e pretende contribuir com um donativo para auxiliar nos encargos financeiros inerentes ao alojamento desta plataforma, pode encontrar mais informações sobre os várias formas disponíveis para o fazer no seguinte tópico: leia mais... O seu contributo é importante! Obrigado.

azbox elite booting eterno jtag

nkaska

Novo
Membro Inactivo
Entrou
Jul 22, 2009
Mensagens
1
Gostos Recebidos
0
Olá

após fazer muitos testes com o cabo jtag de várias formas, tenho esta situação também e já não sei que mais fazer. portanto comunica mas não executa os comandos.
Retirei inclusive fisicamente a flash por outra e o resultado é exactamente o mesmo. Terá de ser carregado por JTAG penso eu ou adaptador tsop48 mas não percebo o que se passa para não estar a funcionar.
Se alguém tiver ideias fico muito grato pois já li todos os manuais, vi todos os videos e parece-me que estou perto da solução mas não consigo compreender o que está mal.

1º Terminal

Microsoft Windows [versão 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. Todos os direitos reservados.

c:\openocd\0.4.0\bin>openocd -f interface\parport_dlc5.cfg -f board\azbox.cfg
Open On-Chip Debugger 0.4.0 (2010-02-22-19:05)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.berlios.de/doc/doxygen/bugs.html
parport port = 0x0
jtag_nsrst_delay: 100
jtag_ntrst_delay: 100
trst_and_srst separate srst_gates_jtag trst_push_pull srst_open_drain
Warn : smp8634.cpu: nonstandard IR mask
Warn : use 'smp8634.cpu' as target identifier, not '0'
Warn : No parport port specified, using default '0x378' (LPT1)
Info : clock speed 500 kHz
Info : JTAG tap: smp8634.cpu tap/device found: 0x08630001 (mfg: 0x000, part: 0x8
630, ver: 0x0)
Info : accepting 'telnet' connection from 0
Warn : target was in unknown state when halt was requested
Info : Halt timed out, wake up GDB.
Error: timed out while waiting for target halted
Command handler execution failed
Info : JTAG tap: smp8634.cpu tap/device found: 0x08630001 (mfg: 0x000, part: 0x8
630, ver: 0x0)
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
target state: halted
target halted in MIPS32 mode due to debug-request, pc: 0x00000000
Info : JTAG tap: smp8634.cpu tap/device found: 0x08630001 (mfg: 0x000, part: 0x8
630, ver: 0x0)
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
target state: halted
target halted in MIPS32 mode due to debug-request, pc: 0x00000000
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Info : Flash Manufacturer/Device: 0x00e6 0x00e6
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Could not probe bank: no QRY
Try workaround w/0x555 instead of 0x55 to get QRY.
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Could not probe bank: no QRY
Error: auto_probe failed -900

Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Info : Flash Manufacturer/Device: 0x00d6 0x00d6
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Could not probe bank: no QRY
Try workaround w/0x555 instead of 0x55 to get QRY.
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Could not probe bank: no QRY
Error: auto_probe failed -900

flash bank '0' not found
Command handler execution failed
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Info : Flash Manufacturer/Device: 0x0014 0x0014
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Could not probe bank: no QRY
Try workaround w/0x555 instead of 0x55 to get QRY.
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Error writing unexpected address 0xfffffffe
Error: Could not probe bank: no QRY
Command handler execution failed
shutdown command invoked


c:\openocd\0.4.0\bin>

2º Terminal

Open On-Chip Debugger
> halt
target was in unknown state when halt was requested
Halt timed out, wake up GDB.
timed out while waiting for target halted
Command handler execution failed
in procedure 'halt' called at file "command.c", line 650
called at file "command.c", line 361
> reset
JTAG tap: smp8634.cpu tap/device found: 0x08630001 (mfg: 0x000, part: 0x8630, ve
r: 0x0)
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
target state: halted
target halted in MIPS32 mode due to debug-request, pc: 0x00000000
> reset init
JTAG tap: smp8634.cpu tap/device found: 0x08630001 (mfg: 0x000, part: 0x8630, ve
r: 0x0)
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
target state: halted
target halted in MIPS32 mode due to debug-request, pc: 0x00000000
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
> flash protect 0 0 last off
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Flash Manufacturer/Device: 0x00e6 0x00e6
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Could not probe bank: no QRY
Try workaround w/0x555 instead of 0x55 to get QRY.
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Could not probe bank: no QRY
auto_probe failed -900

> flash protect_check 0
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Flash Manufacturer/Device: 0x00d6 0x00d6
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Could not probe bank: no QRY
Try workaround w/0x555 instead of 0x55 to get QRY.
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Could not probe bank: no QRY
auto_probe failed -900

flash bank '0' not found
flash protect_check bank_id
Command handler execution failed
in procedure 'flash' called at file "command.c", line 650
called at file "command.c", line 361
> flash info 0
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Flash Manufacturer/Device: 0x0014 0x0014
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Could not probe bank: no QRY
Try workaround w/0x555 instead of 0x55 to get QRY.
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Error writing unexpected address 0xfffffffe
Could not probe bank: no QRY
Command handler execution failed
in procedure 'flash' called at file "command.c", line 650
called at file "command.c", line 361
> shutdown
shutdown command invoked


Conexão ao host perdida.

c:\openocd\0.4.0\bin>
 
Topo