Fonsec@
In Memoriam
- Entrou
- Set 22, 2006
- Mensagens
- 29,306
- Gostos Recebidos
- 6
This new bootloader has an activation period when flashing images. OK button must now be pressed to flash an image and burn.bat no longer required for images.
To flash bootloader: -
To flash images follow instructions on the LCD display.
To flash bootloader: -
- Copy both burn.bat and cfe.bin to root of USB stick
- Power off receiver.
- Connect USB stick to receiver and power on.
- Wait a few seconds for the bootloader to flash and the receiver to reboot. Be patient, the standby button LED will go red/blue etc.., you must wait for the receiver to reboot itself. Do not remove the stick or power off until fully rebooted.
To flash images follow instructions on the LCD display.